Sennheiser SL DW HEADMIC SET Instruction manual SpeechLine Digital Wireless PD - Page 167

Performing a walk test (reception quality) ed. ▷ Click Stop to end the walk test. If the result of the walk test is not satisfying, you can take the following remedial measures: • If possible, position the receiver so that there is always a di- rect line of sight between the antennas (directly on the receiver or remotely mounted) and the paired transmitter. • If possible, remove obstacles between the transmitter and the antennas. • Pay attention to the notes about antenna installation: „Recommendations on antenna mounting" • If necessary, adjust the manually selected transmission power in the Control Cockpit under RF power mode on the RF settings tab. You can find more information under „Multi-room mode". Performing a walk test with the SL Rack Receiver DW on the device To perform a walk test on the device: ▷ Switch on the transmitter and the receiver of the radio link you want to check. ▷ In addition, switch on all other devices that you want to use in the operating environment. ▷ From the receiver's System Settings menu, select the Walk Test menu item. The RF signal level display appears on the display panel of both the receiver and the transmitter. ► ▷ Walk the operating environment with the transmitter. The RF signal level display on the display panel of both the receiver and the transmitter is continuously updated. ▷ Check the RF signal level display for more detailed information on the reception quality: 166