Sennheiser SL DW HEADMIC SET Instruction manual SpeechLine Digital Wireless PD - Page 53
Single-room setup with SL Rack Receiver DW only, Single-room setup with SL Multi-Channel Receiver
View all Sennheiser SL DW HEADMIC SET manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Multi-room mode Single-room setup with SL Rack Receiver DW only ▷ Install all receivers in one rack (see „Installing receivers in a rack"). ▷ Connect all cables for the receivers (see „Connecting the receiver"). ▷ Mount all antennas as recommended and feasible (see „Recommendations on antenna mounting"). ▷ Ensure that all receivers are switched off. ▷ Switch on the first receiver. This receiver will become the Master. ▷ If necessary, pair a transmitter. Only if necessary, as the sets are delivered already paired. ▷ Wait until both the LED of the receiver and the LED of the transmitter light up green. ▷ Perform a walk test to ensure the best reception coverage (see „Performing a walk test (reception quality)"). ▷ Switch on all other receivers. They will synchronize with the Master. Make sure to leave the Master receiver switched on during this step. Single-room setup with SL Multi-Channel Receiver DW only ▷ Install the SL Multi-Channel Receiver DW on a wall or the ceiling with the front side of the receiver facing into the room (see „Mounting the receiver"). ▷ Connect a LAN cable supplying PoE to the Dante I / PoE / Ctrl RJ-45 socket of the first SL Multi-Channel Receiver DW (see „Connecting the receiver"). This receiver will become the Master. ▷ Wait until the LEDs of the receiver light up red. ▷ Connect a LAN cable supplying PoE to the respective Dan52