Sennheiser SL DW HEADMIC SET Instruction manual SpeechLine Digital Wireless PD - Page 70
Controlling and monitoring the receiver via the network
View all Sennheiser SL DW HEADMIC SET manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
SL Rack Receiver DW Connecting an amplifier or mixing console to the receiver The unbalanced audio output (RCA) and the balanced audio output (XLR) at the rear of the receiver are connected in parallel, allowing you to simultaneously connect two devices (e.g. amplifier and mixing console) to the receiver. ► ► Use a suitable audio cable to connect the amplifier or the mixing console to the appropriate audio output of the receiver. We recommend using the balanced audio output (XLR) because balanced cables are less prone to interference than unbalanced cables. Controlling and monitoring the receiver via the network You can connect several receivers in a network using a router or a switch. This allows you to control and monitor a larger SpeechLine Digital Wireless system using the Sennheiser Control Cockpit software. For more information on controlling a system in the network using the Sennheiser Control Cockpit software, refer to the instruction manual of the software. Please note that the host PC on which the Sennheiser Control Cockpit Service is installed must be in the same network as the devices that are to be monitored and controlled. 69