Sennheiser SL DW HEADMIC SET Instruction manual SpeechLine Digital Wireless PD - Page 75

SL Rack Receiver DW Setting up the receiver This sections describes how to set up the receiver. You can also install the receiver in a fixed location, e.g. in a 19" rack. You can find more information about installing the receiver in a fixed location under: „Installing receivers in a rack". Affixing the device feet Only affix the device feet if you are setting the receiver up in the stand-alone position instead of installing it in a 19" rack. The device feet will get in the way if the receiver is installed in a rack. To affix the device feet: ▷ Clean the recesses for the device feet at the base of the re- ceiver. ▷ Affix the device feet to the recesses of the receiver. ▷ Place the receiver on a flat, horizontal surface. The device feet will adhere reliably to the receiver only after some time. Avoid moving the receiver during this time. ATTENTION Risk of staining furniture surfaces The device feet my leave stains if they come into contact with furniture. ▷ Do not place the receiver on delicate surfaces. Attaching the mounting angles The mounting angles are designed to help protect the operating elements from damage or deformation, e.g. if the receiver is dropped. We therefore recommend always attaching the mounting angles, even if you do not want to mount the receiver into a rack. To fasten the mounting angles: ▷ Unscrew and remove the two recessed head screws on each side of the receiver. ▷ Secure the mounting angles to the sides of the receiver us- ing the previously removed recessed head screws. 74