Sennheiser SL DW HEADMIC SET Instruction manual SpeechLine Digital Wireless PD - Page 166

Performing a walk test (reception quality) The display of the radio signal level is continuously updated. ▷ Click Stop to end the walk test. If the result of the walk test is not satisfying, you can take the following remedial measures: • If possible, position the receiver so that there is always a di- rect line of sight between the receiver and the paired transmitter. • If possible, remove obstacles between the transmitter and the receiver. • If necessary, adjust the manually selected transmission power in the Control Cockpit under RF power mode on the RF settings tab. You can find more information under „Multi-room mode". Performing a walk test with the SL Rack Receiver DW in the Control Cockpit To perform a walk test in the Control Cockpit: ▷ Switch on the transmitter and the receiver of the radio link you want to check. ▷ In addition, switch on all other devices that you want to use in the operating environment. ▷ Select the device in the Control Cockpit. ▷ Open the RF settings tab. ► ▷ Click Start under Walk Test. ► ▷ Walk the operating environment with the transmitter. The display of the radio signal level is continuously updat165