Sharp 208D AR-208S AR-208D Operation Manual Suite - Page 166
Two-sided Original Transmission Function
![]() |
View all Sharp 208D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
HOW TO USE THE FAX FUNCTION TWO-SIDED ORIGINAL TRANSMISSION FUNCTION The RSPF can be used to automatically fax a two-sided original. If desired, the back of the original can be rotated 180° before transmission. Note • The original must be placed in the RSPF when using the two-sided original transmission function. The document glass cannot be used. • The two-sided original transmission function cannot be selected when direct transmission mode is selected. Likewise, direct transmission mode cannot be selected when the two-sided original transmission function is selected. Follow these steps to fax a two-sided original: 1 Place the original(s) in the RSPF. (p.52) Original face up For the size and weight of two-sided originals that can be scanned using the RSPF, see page 50. Tablet If you are faxing a two-sided tablet type original, select "ON (NON-ROTATE)". 2 Press the [2-SIDED TX] key until the appropriate setting appears. The selections are as follows: OFF ON (ROTATE) ON (NON-ROTATE) To cancel this function, select "OFF". 3 Press the [ENTER] key. Select the setting according to the original type (booklet or tablet) as indicated below. If the setting is incorrect, every other page of the received fax will be inverted. Booklet If you are faxing a two-sided booklet type original, select "ON (ROTATE)". 58
![](/manual_guide/products/sharp-208d-ar208s-ar208d-operation-manual-suite-0f78fc8/166.png)