Sharp 208D AR-208S AR-208D Operation Manual Suite - Page 217
User Programs For The Network Expansion Kit
View all Sharp 208D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
USER PROGRAMS FOR THE NETWORK EXPANSION KIT When the network expansion kit is installed in the machine, the following programs are added to the user programs for Print mode. The IP address and other network settings are configured using these user programs. Note The procedure for selecting a user program setting is explained in "SELECTING A SETTING FOR A USER PROGRAM" in the operation manual. Additional user programs for Print mode Program number Program name Settings (factory default settings appear in bold) 4 ENABLE TCP/IP 1: YES 2: NO 5 ENABLE DHCP 1: YES 2: NO 6 IP ADDRESS SETTING • IP ADDRESS • SUBNETMASK • DEFAULT GATEWAY 7 ENABLE NETWARE 1: YES 2: NO 8 ENABLE ETHERTALK 1: YES 2: NO 9 ENABLE NETBEUI 1: YES 2: NO Explanation This program must be enabled to use the machine on a TCP/IP network. "IP ADDRESS SETTING" must also be configured. This program is initially enabled (factory default setting). If "YES" is selected (factory default setting) and the machine is connected to a TCP/IP network, the IP address will be acquired automatically. If you will manually assign an IP address using "IP ADDRESS SETTING", select "NO". This program is used to set the IP address (IP address, Subnet Mask, and Gateway) of the machine when TCP/IP protocol is used on the network. When "ENABLE DHCP" is selected, the machine will obtain an IP address automatically. This is the factory default setting. This program must be enabled to use the machine on a network that uses NetWare protocol. This program is initially enabled (factory default setting). This program must be enabled to use the machine on a network that uses EtherTalk protocol. This program is initially enabled (factory default setting). This program must be enabled to use the machine on a network that uses NetBEUI protocol. This program is initially enabled (factory default setting). - 9 -