Sharp 208D AR-208S AR-208D Operation Manual Suite - Page 60
Print mode, Program, number, Program name, Setting codes, Explanation
![]() |
View all Sharp 208D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
USER SETTINGS Print mode Program number Program name Setting codes (factory default setting appears in bold) Explanation 1 FORCED OUTPUT 1: ON 2: OFF • When this function is enabled, printing in printer mode will automatically continue using a different size of paper if the specified size of paper runs out in all trays. This feature does not function in copy mode. • This sets the USB 2.0 data transfer speed. To obtain the fastest speed when using the USB 2.0 connector, first verify that your computer meets the system requirements (operating system and driver), 2 USB 2.0 MODE SWITCH*1 1: FULL-SPEED and then use this program to 2: HI-SPEED change the USB 2.0 mode to "Hi-Speed". Note that the setting should not be changed while running a TWAIN driver. (For the system requirements, see "System requirements for USB 2.0 (Hi-Speed mode)" (p.49).) 3 AUTO TRAY SWITCH*2 1: ON 2: OFF • If the paper runs out during printing and there is paper of the same size in another tray, this function automatically switches to that tray (excluding the bypass tray). The function can be disabled. *1 The scanning speed increases when the USB 2.0 mode is set to "HI-SPEED", however, the printing speed does not increase considerably. *2 When the 250-sheet paper feed unit is installed. 58
![](/manual_guide/products/sharp-208d-ar208s-ar208d-operation-manual-suite-0f78fc8/60.png)