Sharp 208D AR-208S AR-208D Operation Manual Suite - Page 216

CONNECTING TO A NETWORK After the network expansion kit has been installed in the machine, connect a LAN cable to the LAN connector of the network expansion kit. Use a network cable that is shielded. CHECKING THE IP ADDRESS To check the IP address of the machine, hold down the status button on the network expansion kit at least 2 seconds to print out a Printer Setting List. Status button HOW TO RESET THE NETWORK EXPANSION KIT To reset the network expansion kit, turn on the power while holding down the status button on the network expansion kit. Continue to hold down the status button until a beep sounds. Network scanner destination information and scanning settings will remain after the network Caution expansion kit is reset, however, the network settings and printer settings will revert to the factory default settings. - 8 -