Sharp 208D AR-208S AR-208D Operation Manual Suite - Page 251

USING THE NETWORK SCANNER FUNCTION TRANSMISSION METHODS FOR SCAN TO E-MAIL The e-mail address for a Scan to E-mail transmission can be entered manually or selected from e-mail addresses stored on an LDAP server. Sending an image by entering an e-mail address manually 1 Press the [MODE SELECT] key to select scanner mode. The "SCAN" indicator lights up to indicate that scanner mode is selected. 2 Place the original in the document feeder tray or on the document glass. For information on how to place the original, see "IMAGE ORIENTATION AND STANDARD ORIGINAL LOADING ORIENTATION" (p.20). 3 Select "INPUT ADDRESS" and press the [ENTER] key. If "INPUT ADDRESS" does not appear, make SCAN USING: INPUT ADDRESS sure that "Scan to ad-hoc E-mail" is enabled in the Web page (p.14). 4 Enter the destination e-mail address and press the [ENTER] key. To enter characters, see INPUT ADDRESS [email protected] "HOW TO ENTER CHARACTERS" (p.20). 2 5 Press the [ ] key ( ) or [ ] key ( ) to select the original size and then press the [ENTER] key. The original size changes as follows each ORIG. SIZE ENTER 8.5X11 time the [ ] key ( ) or [ ] key ( ) is pressed: "8.5x11"→"8.5x5.5" →"A4"→"B5"→"A5" →"8.5x14"→"8.5x13". 6 Press the [START] key ( ) to begin scanning. Note The original is scanned using the settings of the scan mode that has the "Default Scan Mode" checkbox selected. - 18 -