Sharp 208D AR-208S AR-208D Operation Manual Suite - Page 187
Timer Operations
View all Sharp 208D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
TIMER OPERATIONS The timer function allows you to set a transmission or polling operation to be performed automatically at a time you specify. Up to five transmission operations or polling operations can be set at any one time, and the times they will be performed can be specified up to a week in advance. You can use this function, for example, to take advantage of lower night time telephone rates without having to be there when the operation is performed. ● For a timer transmission, scan the original into memory when you set the transmission. Scanning the original into memory is convenient because you do not have to worry about original mix-ups or forgetting to load the original. ● If the memory becomes full while the original is being scanned, "MEMORY FULL" will appear in the display. • Press the [START] key ( ) to transmit the pages that have been stored up to that point in memory. • Press the [CLEAR ALL] key ( ) to cancel the entire transmission. Your fax machine Recipient • Select the recipient -sending method -time • Select transmission settings The scheduled time arrives memory Transmission begins beep Transmission /reception Setting up a timer transmission job: 1 Press the [MENU] key. 4 5 Enter the time at which transmission will take place with the numeric keys. Enter two digits for the hour and two digits for the minute. 2 Press the [ ] key ( ) or [ ] key ( ) until "1:TIMER MODE" appears, and then press the [ENTER] key. Selection "1:TIMER MODE" 3 Press the [ ] key ( ) or [ ] key ( ) to select "1:SET". Selection "1:SET" To cancel a timer operation, select "2:CLEAR". 5 Press the [ ] key ( ) or [ ] key ( ) to select "AM" or "PM" and press the [ENTER] key. 79