Sharp 208D AR-208S AR-208D Operation Manual Suite - Page 168
Chain Dialing, Normal Dialing Using The [speaker] Key
View all Sharp 208D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
HOW TO USE THE FAX FUNCTION CHAIN DIALING The Chain Dialing function allows you to combine a Rapid Key or Speed Dial number (See "STORING NUMBERS FOR AUTOMATIC DIALING" (p.42)) set for Chain Dialing with another Rapid Key, Speed Dial number, or number dialed with the numeric keys to dial one fax number up to 50 digits long. The following are some examples of how this can be done: • Press Rapid Keys set for Chain Dialing in the correct order for the fax number that you wish to dial. For example, press Rapid Key 01 followed by Rapid Key 02. The final Rapid Key pressed for the fax number must not be set for Chain Dialing. Transmission will begin automatically when the final Rapid Key is pressed. • Enter Speed Dial numbers set for Chain Dialing in the correct order for the fax number that you wish to dial. For example, press the [SPEED/SEARCH] key and [2] [2], followed by the [SPEED/SEARCH] key and [2] [7]. The final Speed Dial number entered for the fax number must not be set for Chain Dialing. Transmission will begin when the [START] key ( ) is pressed after the final Speed Dial number is entered. • Enter the fax number that you wish to dial with the numeric keys. Press the [REDIAL/PAUSE] key to enter a pause and then enter the next number. Transmission will begin when the [START] key ( ) is pressed after the final number is entered. Note • To use a Rapid Key or Speed Dial number for Chain Dialing, the Rapid Key or Speed Dial number must be set for Chain Dialing when it is stored (See "STORING NUMBERS FOR AUTOMATIC DIALING" (p.42)). • When using Chain Dialing, the international communication setting of the final number entered is effective. International communication mode cannot be used if the final number is entered using a Rapid Key or Speed Dial number that does not have the setting enabled, or if the final number is entered with the numeric keys. NORMAL DIALING USING THE [SPEAKER] KEY When dialing normally with the [SPEAKER] key, press the [SPEAKER] key and dial using the numeric keys. You can hear the line and fax tones from the other machine through the speaker, allowing you to confirm the response of the other machine. 1 Set the original in the RSPF and press the [SPEAKER] key. (See "SETTING THE ORIGINAL" (p.52)) To adjust the volume, press the left and [ ] key ( ) or [ ] key ( ). Dialing with a Speed Dial number and then press the [ENTER] key or [START] key ( ). 2 Dial the fax number of the receiving machine. Dialing with the numeric keys. 3 When you hear the fax reception tone of the other machine, press the [START] key ( ). Dialing with a Rapid Key. 4 Press the [ ] key ( ) or [ ] key ( ) to select "1:SEND", and then press the [ENTER] key or [START] key ( ). 60