Sharp 208D AR-208S AR-208D Operation Manual Suite - Page 20
Loading paper in the bypass tray, Press the [TRAY SELECT] key
View all Sharp 208D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
LOADING PAPER Loading paper in the bypass tray Note • Paper must be fed narrow side first into the feed slot. • Special papers such as transparency film, labels, and envelopes must be fed one sheet at a time through the bypass tray. • When copying onto transparency film, remove each copy promptly. Do not let copies stack up. 1 Open the bypass tray and extend the tray. Note To close the bypass tray, perform step 1 and then step 2 in the illustration and push the round projections at the right of the tray until they click. 2 1 2 Set the bypass tray paper guides to the paper width. Insert the paper (print face down) all the way into the bypass tray. 3 Press the [TRAY SELECT] key ( Print face ) to select the bypass tray. Note for loading thick paper Copying on thick paper requires higher fusing temperature setting. Set the user program 29 to "2 (HEAVY PAPER)" when using thick paper. (See page 57.) 18