Sharp 208D AR-208S AR-208D Operation Manual Suite - Page 65

TROUBLESHOOTING THE MACHINE The following problems are related to the general operation of the machine and copying. Problem Cause and solution Page The machine is not plugged into a power outlet. - → Plug the machine into a grounded outlet. Power switch OFF. → Turn the power switch ON. 12 The power save indicator is blinking. Indicates that the machine is warming up. - → Copies cannot be made until the machine has finished warming up. The machine does not operate. The front cover or the side cover is not completely closed. - → Close the front cover or the side cover. The machine is in auto power shut-off mode. → In auto power shut-off mode, all lights are off except the power save indicator. 13 Press the [START] key ( ) to resume normal operation. The scan head locking switch is locked. → Unlock the scan head locking switch. 76 Select the correct original type for the original. → Select AUTO with the [EXPOSURE] key 24 or press the [ ] key ( ) or [ ] key Copies are too dark or ( ) to manually select an appropriate too light. exposure. → If the copy is too light or too dark even 57 though AUTO was selected with the [EXPOSURE] key, adjust the automatic exposure level. The original is not placed face up in the 8 RSPF or face down on the document glass. 20, 21 Blank copies. → Place the original face up in the RSPF or face down on the document glass. The scan head locking switch is locked. → Unlock the scan head locking switch. 76 63