Sharp BD-MPC41U BD-MPC41U Operation Manual - Page 37

Before Starting Playback Setting the Remote Control Code • 3 types of remote control codes operate this system: RC-1, RC-2 and RC-3. If you operate this system by remote control along with SHARP Blu-ray Disc Player or DVD Player placed next to it simultaneously, switching the remote control code (both the main unit and remote control) to one of the signals (RC-1, RC-2 or RC-3) will let you operate only with this system. • Make sure to set the main unit and remote control to the same remote code. You can not operate the system if they are not set to the same code. Buttons under the cover Setting the remote control code of the system 3 Point the remote control at the main unit, then press and hold the ON SCREEN for more than 10 seconds. Remote control sensor 4 Press POWER (on the remote control) to turn on the system. NOTE • If the battery of the remote control becomes depleted or needs to be replaced, the remote control code is reset to RC-1 on the remote control. Performing a RESET resets the remote control code to RC-1 on the main unit. Set the remote control code on the main unit and remote control, as necessary. • The following buttons on the remote control can be operated regardless of the remote control code. - FM, BD/AUX, iPod/d, SUB WOOFER, CENTER LEVEL, DYNAMIC VOL, MULTI, DISPLAY, MUTE, VOL+, VOL-, SOUND MODE, AUDIO DELAY, DIMMER Setting the remote control code of the remote control Example: Setting the code to "RC-3". 1 Press and hold 3 first and then POWER on the remote control together for more than 5 seconds. 2 Press POWER (on the main unit) to turn off the system. POWER Preparations and Basic Operations 35