Sharp BD-MPC41U BD-MPC41U Operation Manual - Page 80
ENTER, POWER, If prompted by a displayed message to turn off
UPC - 074000354999
View all Sharp BD-MPC41U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
SETTINGS 10 During the data checking, "Checking" blinks. Now checking the data in USB memory device. Checking • The current version of this unit software and the version of the update file on the USB memory device are displayed. To update this system software with update file, select "Yes", and press ENTER. Software update file is detected in the USB memory device. Start update? Current Ver. : Update Ver. : xxxxxxxxxx yyyyyyyyyy Yes No • If the USB memory device is not properly installed or the correct update file cannot be found on the USB memory device, an error message is displayed. Check the file on the USB memory device, and then reinsert the USB memory device correctly. Software update file is not detected in the USB memory device. Confirm that you have transferred the file to the USB memory device and retry software update. Confirm that you have inserted the USB memory device into the correct device. OK 12 When the software is successfully updated, a screen is displayed indicating that the update process is completed. • If the update has failed, check the file in the USB device and try Software Update again. NOTE • If the update of the AUDIO section starts automatically after the software update, the STANDBY indicator will blink. When the update is completed, the STANDBY indicator stops blinking and lights up. (The power will be turned off automatically.) Never disconnect the AC power cord until this status is reached. 13 If prompted by a displayed message to turn off the system, press POWER to turn it off. 14 Remove the USB memory device. • Delete unneeded software update data using a PC after the software update process is completed. There is more than one software file in the USB memory device. Confirm that only the software update file is in the USB memory device. OK 11 Press ENTER to start updating. • The screen becomes dark for a while until the update screen can be displayed. Please wait for the update screen to appear. Do not unplug the AC cord. The picture will temporarily go dark until the software update display appears. Wait several minutes and do not unplug the AC cord. OK Now updating * Do not unplug AC cord. Update Version yyyyyyyyyy 30% 78