Sharp BD-MPC41U BD-MPC41U Operation Manual - Page 74
confirming the settings, press, Test, then press
UPC - 074000354999
View all Sharp BD-MPC41U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
SETTINGS 12 For the advanced setting (the setting of the Ethernet connection speeds), press a/b to select "Yes" or "No", then press ENTER. • Normally select "No", then press ENTER. • The Ethernet connection speeds can be set when you select "Yes", then press ENTER. • As automatic detection is made (factory preset mode), this setting is not normally necessary. If a situation occurs in which the Ethernet connection fails, etc., change the setting and confirm if the Ethernet connection successfully works. When the connection speed is set, select "Next", then press ENTER. Option Ethernet Connection Speeds Auto-Detection 10M Half Duplex 10M Full Duplex 100M Half Duplex 100M Full Duplex Next 13 For testing the connection to the Internet, after confirming the settings, press a/b to select "Test", then press ENTER. • "Test" is available only when setting to obtain the IP address automatically. "Test" cannot be selected if the IP address has not been obtained automatically. Confirm the current setting. IP Address : xxx xxx xxx xxx Netmask : xxx xxx xxx xxx Gateway : xxx xxx xxx xxx DNS Address : xxx xxx xxx xxx MAC Address : xx:xx:xx:xx:xx:xx Test Complete • As a result of the test, if the Internet connection fails, enter the setup values manually. 14 Press a/b to select "Complete", then press ENTER. 72