Sharp MX-C311 Software Setup Guide - Page 51
When using a port created with Standard, TCP/IP Port
View all Sharp MX-C311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
5 Create the new port. (1) Enter the machine's IP address. ☞ Checking the IP address of the machine (page 7) (2) Make sure that [LPR] is selected. (3) Make sure that [lp] is entered. (4) Click the [OK] button. CHANGING THE PORT (1) (2) (3) (4) 6 Click the [Close] button in the screen of step 4. In Windows 98/Me, this step is not required. Go to the next step. 7 Make sure the created printer port is selected in the printer properties window and then click the [Apply] button. X When using a port created with "Standard TCP/IP Port" When using a port created using "Standard TCP/IP Port" in Windows 2000/XP/Server 2003/Vista/Server 2008, in the screen that appears after you click the [Configure Port] button in the screen of step 3, make sure the [SNMP Status Enabled] checkbox is not selected ( ). If the [SNMP Status Enabled] checkbox is selected ( ), it may not be possible to print correctly. 49