Sharp PG-D210U PGD210U Operation Manual - Page 10

Setting Up the Projector Using the Focus and Zoom • Zoom, Focus and Reversed/Inverted Image mode functions broaden your options for projector placement. • See pages 10, 11 and 12 for details on projector setup. SIDE VIEW Zoom Ceiling setting Invert Image 2 POWER LAMP TEMP. POWER indicator 3 → Zoom ring (Lens housed) 4 (Wide angle) Lens focusing ring 5 ↔ Zoom ring (Maximum picture size) (Minimum picture size) Table setting Zoom 1. Turn on the MAIN POWER Turn on the MAIN POWER switch on the back of the projector. 2. Turn on the POWER Press the POWER ON/OFF button on the projector or the POWER ON button on the remote control to turn on the power. 3. Rotating the zoom ring (from the housed position to the wide angle position) Rotate the zoom ring on the lens until it clicks. The picture can be adjusted within the zoom range. 4. Adjusting the focus Rotate the lens focusing ring until the image on the screen is in focus. 5. Adjusting the zoom Rotate the zoom ring. The picture can be adjusted to the desired size within the zoom range. (Zoom) E-9