Sharp PG-D210U PGD210U Operation Manual - Page 6

Location of Controls FRONT VIEW Speakers Zoom ring Remote sensor Lens focusing ring Cooling fan (Intake vent) Cautions: • The exhaust vent, the lamp cage cover and adjacent areas may be extremely hot during projector operation. To prevent injury, do not touch these areas until they have sufficiently cooled. • Allow at least 4 ؆ (10 cm) of space between the cooling fan (exhaust vent) and the other nearest wall or obstruction. • If the cooling fan becomes obstructed, a protection device will automatically turn off the projector lamp. This does not indicate a malfunction. Remove the projector plug from the wall outlet and wait 10 minutes. Then turn on the power by plugging the cord back in. This will return the projector to its normal mode. OPERATION PANEL ON TOP OF PROJECTOR LAMP REPLACEMENT indicator POWER indicator TEMPERATURE WARNING indicator POWER ON/OFF button BLACK SCREEN button ADJUSTMENT buttons ENTER button POWER LAMP TEMP. ON/OFF BLACK SCREEN MUTE INPUT SELECT VOL MENU MUTE button VOLUME UPDOWN buttons INPUT SELECT button MENU button ENTER SIDE AND REAR VIEW Cooling fan (Exhaust vent) Carrying handle COMPUTER RGB COMPUTER RGB INPUT 2 connector (HD-15) INPUT 1 connector COMPUTER AUDIO INPUT 1 (HD-15) (3.5 mm Stereo Minijack) Security Lock Anchor COMPUTER RGB This projector has a Kensington OUTPUT Security Standard connector for use with a Kensington MicroSaver connector (HD-15) Security System. Refer to the information that came with the system for instructions on how to use it to secure this model. VIDEO INPUT 1 COMPOSITE Video: RCA Audio: RCA Note: • Be sure to use the Computer Control cable when connecting the PC CONTROL terminals. VIDEO INPUT 2 S-Video: 4-pin mini DIN Audio: RCA IN 1 COMPUTER RGB OUT L R IN 1 S-VIDEO VIDEO IN 2 L R AUDIO IN 2 COMPUTER AUDIO IN 1 IN 2 COMPUTER AUDIO INPUT 2 (3.5 mm Stereo Minijack) AUDIO WIRED OUTPUT REMOTE WIRED REMOTE CONTROL INPUT 1 PC CONTROL 2 (3.5 mm Minijack) AUDIO OUTPUT (3.5 mm Stereo Minijack) OFF ON (VIDEO/COMPUTER RGB) 110-120V/ 200-240V~ MAIN POWER switch AC INLET • PC CONTROL 1: Use the supplied computer control cable when operating the remote control as a wireless mouse or when controlling the projector from the RS-232C terminal. • PC CONTROL 2: Use the computer control cable (CTANZ0711CE01) (sold separately) when operating the remote control as a wireless mouse. Notes: • RS-232C does not function when connected to PC CONTROL 2. • See page 15 for connection. E-5