Sharp PG-D210U PGD210U Operation Manual - Page 18

4 IN 2 COMPUTER AUDIO IN 1 IN 2 AUDIO WIRED OUTPUT REMOTE 1 PC CONTROL 2 3. Connecting to other compatible computers When connecting the projector to a compatible computer other than an IBM-PC (VGA/SVGA/XGA/SXGA) or Macintosh series, a separate cable may be needed. Please contact your dealer for ordering information. Notes: • Connecting computers other than the recommended types may result in damage to the projector, the computer, or both. • Connect the audio from the computer to the COMPUTER AUDIO INPUT terminal. 4. Connecting to the COMPUTER AUDIO INPUT • The COMPUTER AUDIO INPUT 1 accepts audio from the COMPUTER RGB 1 input, and the COMPUTER AUDIO INPUT 2 accepts audio from the COMPUTER RGB 2 input. • Connect a 3.5 mm Stereo Minijack cable from the audio output terminal on the computer to the COMPUTER AUDIO INPUT terminal on the projector. 5 Direct connection IN 1 COMPUTER RGB OUT IN 2 Optional Macintosh adaptor cable U.S.A. ONLY or External IBM-PC monitor External Macintosh monitor E-17 5. Connecting an external monitor Connect your computer monitor to the projector's COMPUTER RGB OUTPUT terminal to view images simultaneously on the external monitor and the projection screen. Select either RGB 1 or RGB 2 to output the images to the monitor. Caution (Apple Macintosh): Do not connect the COMPUTER RGB OUTPUT to any monitor except the following: Apple Color RGB Monitor 13 ؆/14؆ (640 ‫ ן‬480), 16 ؆/17؆ (832 ‫ ן‬624) or 19؆ (1,024 ‫ ן‬768) The output signal from the projector to the monitor should be the same as the input signal from the computer to the projector. Examples: Input 13؆/14؆ (640 ‫ ן‬480) → Output (640 ‫ ן‬480) Input 16؆/17؆ (832 ‫ ן‬624) → Output (832 ‫ ן‬624) Input 19؆ (1,024 ‫ ן‬768) → Output (1,024 ‫ ן‬768) Note: • The supplied adaptor is only for use with H-SYNC and V-SYNC output. No picture will appear when connected to monitors that only use C-SYNC. Notes: • When using the projector with an external IBM-PC monitor, connect the monitor using the supplied cable. When using the projector with a Macintosh monitor, an optional adaptor cable is required. Before using any other type of monitor, carefully check the monitor's interface specifications and make sure that they match the specifications of the projector's interface. • The external monitor output will only display an analog computer input signal. It will not display a digital or video input signal. To split the composite video signal, use a video distribution amplifier. This is available from your local dealer. The computer RGB output will only loop through the same signal connected to the computer RGB input. (VGA IN → VGA OUT, Mac IN → Mac OUT)