Sharp PG-D210U PGD210U Operation Manual - Page 25

Adjusting the Picture On-Screen Display 1 RGB1 ADJ. RGB1 INPUT ADJ. IMAGE ADJ. AUDIO SYSTEM SETUP LANGUAGE :SEL. ENTER : N E X T MENU : E N D 2 RGB1 ADJ. PICTURE BRIGHT RED BLUE RESET 0- + 0- + 0- + 0- + :SEL. :ADJ. ENTER : N E X T MENU : E N D 3 PICTURE 0- + :SEL. :ADJ. ENTER : E N T E R MENU : E N D • This projector's picture is factory preset to standard settings. However, you can adjust it to suit your own preferences with the ADJUSTMENT buttons on the projector and the remote control. • The adjustments can be memorized in RGB 1, RGB 2, VIDEO 1 or VIDEO 2 separately. • Four picture modes can be adjusted: "PICTURE," "BRIGHT," "RED," and "BLUE". Adjusting the Picture 1. Use the MENU button to select the mode to be adjusted • When the MENU button is pressed, the MENU mode is indicated for about 30 seconds. Press the ADJUSTMENT ƒ/∂ buttons to select "RGB 1 ADJ.", then press the ENTER button. 2. Adjust the Picture • Press the ADJUSTMENT ƒ/∂ buttons to highlight yellow the picture adjustment item you want to adjust. • Press the ADJUSTMENT ß/© buttons to move the " " mark of the selected adjustment item to the desired setting. • The adjustment mode is displayed for about 30 seconds. Description of Adjustment Items Selected item PICTURE BRIGHT RED BLUE COLOR TINT ADJUSTMENT ß button For less contrast For less brightness For weaker red For weaker blue For less color intensity Skin tones become purplish ADJUSTMENT © button For more contrast For more brightness For stronger red For stronger blue For more color intensity Skin tones become greenish SHARPNESS RESET For less sharpness For more sharpness All RGB Video Adjustment items are returned to the factory preset settings. Note: To reset all adjustment items, select "RESET" in "RGB 1 ADJ." mode and press the ENTER button. 3. Display only the item to adjust • Press the ADJUSTMENT ƒ/∂ buttons to highlight yellow the picture adjustment item you want to adjust. If you press the ENTER button at this time, only the selected item will be displayed. • Press the ADJUSTMENT ß/© buttons to move the " " mark of the selected adjustment item to the desired setting. • The adjustment mode is displayed for about 30 seconds. Notes: • When a VIDEO signal input has been selected, only "PICTURE," "BRIGHT," "COLOR," "TINT" and "SHARPNESS" can be adjusted. • TINT only appears in NTSC 3.58 mode. 4. Press the MENU button anytime to exit RGB ADJ. E-24