Sharp PG-D210U PGD210U Operation Manual - Page 23

4 On-Screen Display LANGUAGE ENGLISH DEUTSCH ESPAÑOL NEDERLANDS FRANÇAIS ITALIANO SVENSKA :SEL. ENTER : E N T E R MENU : E N D 5 IMAGE ADJ. BLUE SCREEN BLK SCRN DISP INPUT DISPLAY SYSTEM REVERSE INVERT [ON] [OFF] [OFF] [OFF] [OFF] :SEL. ENTER : N E X T MENU : E N D © SYSTEM AUTO PAL SECAM NTSC 4.43 NTSC 3.58 :SEL. ENTER : E N T E R MENU : E N D 4. Select one of eight ON-SCREEN DISPLAY languages You can return to the previous screen by selecting the uppermost item (turquoise) with the ADJUSTMENT ƒ/∂ buttons (in this case, "LANGUAGE") and then pressing the ENTER button. The on-screen display is set to English at the factory. The language for the unit's ON-SCREEN DISPLAY can be set to English, German, Spanish, Dutch, French, Italian, Swedish or Japanese. Setting the ON-SCREEN DISPLAY language 1. Press the MENU button. The menu will appear on the screen. 2. Press the ADJUSTMENT ƒ/∂ buttons to highlight the "LANGUAGE" item yellow. Then press the ENTER button to display the language menu. 3. Press the ADJUSTMENT ƒ/∂ buttons to highlight the desired language yellow. Then press the ENTER button to set the language. The ON-SCREEN DISPLAY is now programmed to display in the language chosen. 5. Change the system mode The video input system mode is set to "AUTO" at the factory, but it can be changed to a different mode if the selected system mode is not compatible with the connected audiovisual equipment (when a color image appears in black and white, etc.). 1. Press the MENU button. The menu will appear on the screen. 2. Press the ADJUSTMENT ƒ/∂ buttons to highlight the "IMAGE ADJ." yellow. Then press the ENTER button to display the "IMAGE ADJ.". 3. Press the ADJUSTMENT ƒ/∂ buttons to highlight "SYSTEM" yellow. Then press the ENTER button to display the "SYSTEM". 4. Press the ADJUSTMENT ƒ/∂ buttons to highlight the desired video system yellow. Then press the ENTER button to set the system. Notes: • In AUTO mode, "PAL," "SECAM", "NTSC 4.43" or "NTSC 3.58" is displayed on the screen for a few seconds when the mode is changed with the INPUT SELECT button. • When the system mode is set to "AUTO", you may not receive a clear picture due to signal differences. If this happens, switch to the color system you are viewing. E-22