Sharp PG-D210U PGD210U Operation Manual - Page 29

On-Screen Display IMAGE ADJ. BLUE SCREEN BLK SCRN DISP INPUT DISPLAY SYSTEM REVERSE INVERT [ON] [OFF] [OFF] [OFF] [OFF] :SEL. :ADJ. MENU : E N D REMAIN 5M REMAIN 4M REMAIN 1M IMAGE ADJ. BLK SCRN DISP INPUT DISPLAY REVERSE INVERT [OFF] [OFF] [OFF] [OFF] :SEL. :ADJ. MENU : E N D Using the Blue Screen Function This projector is equipped with a Blue Screen function that will turn the screen blue when the video input terminal is not connected to anything, or the video component is turned off. • Press the MENU button. While the MENU screen is displayed, press the ADJUSTMENT ƒ/∂ buttons to select "IMAGE ADJ.". Then press the ENTER button to display the "IMAGE ADJ." screen as shown. Press the ADJUSTMENT ƒ/∂ buttons to select "BLUE SCREEN," and press the ADJUSTMENT ß/© buttons to select "ON" or "OFF". Press the MENU button to return to the normal screen. • When the Blue Screen function is on, the screen will turn blue when no video signal is being input through the video input terminal. • When the Blue Screen function is on, and no video signal is input via the input terminal for more than 15 minutes, the power is automatically turned off. • The indicators appear as shown each minute before the power is turned off, from 5 minutes before until 1 minute before. Notes: • The Blue Screen function does not operate in RGB mode. • When the power is turned off, the POWER indicator will light red. • To turn the power on again, press the POWER button to set it to OFF, then press it again to set it to ON. Using the Input Mode On-Screen Display Override Function The On-Screen Displays that appear during input select ("RGB 1,024 ‫ ן‬768, 75 Hz," etc.) can be turned off. Once "INPUT DISPLAY" is turned off, the On-Screen Displays will not appear even if the INPUT CHECK button on the remote control is pressed. • Press the MENU button. While the MENU screen is displayed, press the ADJUSTMENT ƒ/∂ buttons to select "IMAGE ADJ.". Then press the ENTER button to display the "IMAGE ADJ." screen as shown. Press the ADJUSTMENT ƒ/∂ buttons to select "INPUT DISPLAY," and press ADJUSTMENT ß/© buttons to select "ON" or "OFF". • When OFF is selected, the On-Screen Display ("RGB 1,024 ‫ ן‬768, 75 Hz," etc.) will not be displayed during input select. E-28