Sharp PN-L702B PN-L702B Professional LCD Monitor Operation Manual
Sharp PN-L702B Manual
View all Sharp PN-L702B manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp PN-L702B manual content summary:
- Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 1
PN-L702B LCD MONITOR OPERATION MANUAL - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 2
IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY FOR CUSTOMERS IN U.K. IMPORTANT The wires in this mains lead are coloured in - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 3
SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 4
products. EU ONLY A. Information on Disposal for Users (private households) 1. In the European Union SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs PLEASE CONTACT YOUR LOCAL SHARP DEALER OR AUTHORIZED SERVICE REPRESENTATIVE FOR ASSISTANCE IN - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 5
. 16. Safety checks - Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition. 17. Wall mounting - When mounting the product on a wall, be sure to install the product according to the method - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 6
such as: • Using fixing devices like wall mount brackets recommended by the manufacturer. • Only using furniture that can safely support the monitor. • Ensuring the monitor is not overhanging the edge of the supporting furniture. • Not placing the monitor on tall furniture (for example, cupboards - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 7
the PC. - Do not operate the screen with a hard or pointed object such as a fingernail, pen, or pencil. - T wo touch panels cannot be used when two displays are connected to the computer. Only the touch panel on the display that is set as the primary monitor will be operable. - If another USB - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 8
bracket compliant with VESA specifications is required. • Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor. • Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 9
43 Settings to connect to a LAN 43 Controlling with a PC 45 Troubleshooting 51 Specifications 53 Mounting Precautions (For SHARP dealers and service engineers 57 For information on the touch panel driver, see the Touch Panel Driver Operation Manual. For information on the Pen Software, see - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 10
nFront view 1 2 2 2 5 4 Part Names 1 2 1. Touch pen ultrasonic sensor 2. Infrared transmitter/receiver 3. Power button (See page 16.) 4. Tray 5. Touch panel power LED 6. Remote control sensor (See page 15.) 7. Input switch (See page 21.) 8. Power LED (See page 16.) 3 6 7 8 nRear view - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 11
control unit 1 2 7 3 8 4 5 9 6 Part Names 1. Signal transmitter 2. POWER button (See page 16.) 3. MUTE button (See page 21.) 4. VOL +/- buttons (See page 21.) BRIGHT +/- buttons (See page 21.) Cursor control ( / / / ) buttons 5. DISPLAY button (See page 21.) 6. MODE button (See page - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 12
cause malfunctions and the other problems. TIPS • When using the touch panel, connect the USB cable to the computer. For details, see the Touch Panel Driver Operation Manual. • Images may not be displayed properly depending on the computer (video card) to be connected. • A screen with 1920 x 1080 - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 13
which supports HDCP. • This terminal allows the daisy chain connection of up to 5 monitors. TIPS • The length of the signal cables or surrounding environment may affect the image quality. • The screen may not display properly when using terminals other than PC DVI-D/AV DVI-D for the input mode. In - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 14
the cable clamp into the cable clamp attachment on the rear of the monitor and fasten the cables. Cable Cable clamp attachment Cable clamp Removing the Handles The handles can be removed. The installation position can be changed. Handle Handle screws Caution • The removable handles and handle - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 15
it in the direction of the arrow. Remote control operation range The operation range of the remote control unit is approx. 16.4 feet (5 m) at an angle of approx 10° from the center to the top/ bottom/right/left of the remote control sensor. 2. See the instructions in the compartment and put in the - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 16
you press the POWER button on the remote control unit, the monitor enters standby mode. • Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode. • To disable the logo screen from displaying when turning the power ON, set LOGO SCREEN to OFF on the SETUP menu. (See - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 17
/time setting screen appears when the power is turned on, the internal battery may be exhausted. Please contact your local Sharp servicing dealer or service center for assistance with battery replacement. • Estimated service life of the internal battery: About 5 years (depending on monitor operation - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 18
pen, the input mode changes to pen mode. When touched with your finger, the input mode changes to handwriting mode. The input mode is set by default to change automatically (Standard mode). TIPS • For the procedures for using the touch pen in the Pen Software, see the Pen Software Operation Manual - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 19
/Windows Vista, the settings can be changed in the touch panel driver. *2 The settings can be changed in "Pen and touch" of Control Panel in Windows 7. For details, see Windows Help. nFinger actions Zoom Use in a screen that is capable of enlargement/reduction. Touch the screen with two fingers and - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 20
computer. Eraser The eraser is used with the Pen Software. For the procedure for using the eraser, refer to the Pen Software Operation Manual. E 20 Caution • When using the eraser, gently bring the cloth side into contact with the screen. Touching the screen with one of the non-cloth sides will - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 21
screen is not displayed. 1. INPUT (Input mode selection) The menu is displayed. Press or to select the input mode, and press to enter. * You can select the input terminal by pressing the input switch of the monitor. Input mode terminal When the PN-ZB01 (optional) is attached Input mode PC DVI-D - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 22
respect the creator's intentions, set the screen size to "NORMAL". • When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the optimal screen size using the screen-size switching function of this monitor. With some software, there may be noise or - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 23
menu will differ depending on the input mode. • The menu screen will close automatically if no operation is performed for about 15 seconds. (DATE/TIME SETTING, SCHEDULE and LAN SETUP screens will close in about 4 minutes.) ▲ ▲ nMenu screen display 1 3 SCREEN PICTURE AUDIO SETUP OPTION PIP/PbyP - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 24
When the setting is different, images will be displayed with washed out blacks and compressed gradients. ADVANCED (AV input) You can adjust more specifically. (See page 30.) COLOR MODE Changes the color mode on the screen. The color mode on the screen can also be changed using a remote control unit - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 25
can delay the screen display after the monitor is turned on. The period can be set up to 60 seconds in units of one second. When this function is activated, the power LED flashes (at approx. 1 second interval) in orange. This function is disabled when 0 is specified. STANDBY MODE When STANDARD is - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 26
is set to the monitor, select ID No. and press . The ID No. will be displayed on the screen. * Certain setting details such as ANALOG GAIN, ANALOG OFFSET, and DISPLAY COLOR PATTERN cannot be copied. LOGO SCREEN Sets whether or not to display the logo screen. nOPTION DATE/TIME SETTING Set the date - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 27
to ON improves touch panel tracking. When two screens are displayed, or when V-POS or V-SIZE is adjusted on the SCREEN menu, the screen may become distorted. In this vent, set to OFF. nPIP/PbyP PIP MODES Sets the display method. OFF Displays one screen. PIP Displays a sub screen inside a main - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 28
simultaneously. Set this function with "PIP MODES" in the PIP/PbyP menu. PIP Main screen A sub screen is displayed inside a main screen. Sub screen PbyP Main screen Sub screen A main screen and a sub screen are displayed in a line. PbyP2 Main screen Sub screen Displays a main screen which - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 29
on a 12-hour basis. (Factory default) Can be entered as 24-hour time using the TIME setting in DATE/TIME FORMAT. (5) INPUT Specifies the input mode at power-on. When not specifying, the screen at the previous power-off appears. Input modes displayed on DVI, HDMI, BNC and D-SUB depend on INPUT SELECT - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 30
the noise of playback images on video. Setting a higher level reduces more noise. However screen automatically or manually. 4. When adjustment is finished, press the [Esc] on the computer's keyboard to quit the adjustment program. 5. Eject the CD-ROM from the CD-ROM drive. TIPS • If the display mode - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 31
, the power LED flashes in red and the screen displays a message: STATUS [xxxx]. LED When a hardware error is detected, the power LED flashes in red. POWER BUTTON Normally, leave this setting as MONITOR. When using an optional part, if instruction appears, change the setting accordingly. CONTROLLER - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 32
by using a PC. By assigning ID numbers to each monitor (see page 33), you can make input mode selection/adjustment or can check the status of a specific monitor. Precautions when the PN-ZB01 (optional) is attached • To control the monitor via RS-232C, set RS-232C/LAN SELECT to RS-232C. • You cannot - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 33
system or software retries the command if this occurs. • If no monitor has been operation lock function (see page 31) L OCKE D Return code (0DH, 0AH) If monitors are connected as shown above, you can execute commands like "Set the volume of the monitor with ID 4 to 20". When controlling monitors - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 34
The IDLK command remains effective until it is canceled, or power is shut off. IDCK Provides screen display of the ID number currently assigned to a monitor, and the ID number currently set for IDLK (if any). Example: (After executing IDLK0002) IDCK0000 ← (Parameter has no meaning.) Returned - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 35
operation can be ensured by sending a new command only after a reply has been returned by 4th (last) monitor. Repeater control can also be used for reading settings. Example: VOLM ? ? ? + WAIT 10 001 20 002 30 003 30 004 Volume settings for all monitors are returned. Setting of the GAMMA user - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 36
LOW POWER. "-" indicates a command which cannot be used in power standby mode regardless of the STANDBY MODE setting. PN-ZB01 (optional) limitations (A) When PN-ZB01 (optional) is not attached, (B) When PN-ZB01 (optional) is attached. ○ : The command can be used. - : Error (ERR) Power control - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 37
Controlling the Monitor with a PC (RS-232C) SCREEN menu Auto CLOCK Function Command Direction ASNC W contents 0-1200 0-63 0-100 When the input mode is PC D-SUB, PC RGB. When the input mode is PC D-SUB, PC RGB. Varies depending on the signal. When the input mode is PC D-SUB, PC RGB. 0-800 on - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 38
PC input) 4: USER, 5: LIGHT 1, 6: STD (during AV input) 0 No pattern display. 1 White single color pattern display. 2 Red single color pattern display. 3 Green single color pattern display. 4 Blue single color pattern display. 99 Red/green/blue mixed color pattern display. Set each color - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 39
the ID number if one has been designated. Displays monitor's own ID number and the selected ID number on the screen. 0: 9600bps, 1: 19200bps, 2: 38400bps 0: Internal speaker, 1: External speaker 0: OFF, 1: ON Copy to all monitors. Copy to the monitor with the set ID Number. Copies the PICTURE menu - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 40
ZOOM2 SPECIAL SETTING (PC D-SUB, PC RGB) Z2SP WR SCAN MODE SCAN WR POWER MANAGEMENT (PC) PMNG WR POWER MANAGEMENT (AV) PMAV WR COLOR SYSTEM CSYS WR AUDIO OUTPUT(RCA) AOUT WR AUDIO LEVEL(STEREO MINI) AIVP WR SELF ADJUST AADJ WR AUTO INPUT CHANGE AINC WR TOUCH PANEL MODE GMDP WR - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 41
PC HDMI 1-2 1: MAIN, 2: SUB 0-1 0: POS1, 1: POS2 0-2 0: POS1, 1: POS2, 2: POS3 0-1 0: MANUAL, 1: AUTO Initialization/Functional Restriction Setting (FUNCTION) menu Function ALL RESET ADJUSTMENT LOCK ADJUSTMENT LOCK TARGET OSD DISPLAY LED TEMPERATURE ALERT STATUS ALERT POWER BUTTON CONTROLLER INPUT - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 42
the Monitor with a PC (RS-232C) Others Function SCREEN SIZE (PC) SCREEN SIZE mode by No Signal 6 Standby mode by abnormal temperature 8 Standby mode by SCHEDULE setting 20 Standby mode by OFF IF NO OPERATION setting *2 *1 (A) (B) ○ ○ ○ - ● ○ ● ○○ ○ ● Commands for setting of the GAMMA user - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 43
PN-ZB01 (optional) is attached, your monitor can be connected to a LAN allowing you to control it from a PC on the LAN. You can also configure the monitor to send e-mail notification when it has a problem installed with Internet Explorer (version 7.0 or later). • To control the monitor via LAN, set - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 44
ON to the monitor. 2. Set RS-232C/LAN SELECT on the SETUP menu to LAN. 3. Set DHCP CLIENT to OFF in LAN SETUP on the SETUP menu. PC operation 4. Launch Internet Explorer, in the "Address" box type "http://192.168.150.2/" and press the Enter key. You will be prompted to enter a user name and - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 45
[Refresh] before the screen finishes updating the current display, the "Server Busy Error" will appear. Wait for a moment before operating your monitor again. • You cannot operate the monitor while it is warming up. • If "DHCP CLIENT" is set to "ON", press DISPLAY on the remote control unit two - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 46
control the operations corresponding to the buttons (POWER INPUT SIZE ) on the remote control unit. (See page 21.) TIPS • After changing DISPLAY COLOR PATTERN to OFF, click [Refresh] to correctly retrieve the status of the monitor. TIPS • In standby mode, Power ON is the operation available. E 46 - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 47
Sets up a user name and password to restrict access to this monitor. After entering a user name and password, click [Apply]. ACCEPT IP ADDRESS You can limit access to this monitor by registering IP addresses of PCs that should have access. To limit access, specify the option "From only specific - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 48
Specify the port number to use when searching for this monitor. Specify a value from 1025 to 65535. INSTALLATION INFORMATION (NAME/LOCATION) Specify the information to display for this monitor in the Internet Explorer window. TIPS • The MONITOR NAME can be up to 16 alphanumeric characters or symbols - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 49
a PC (LAN) ■ MAIL (RECIPIENT) This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error. ■ MAIL (PERIODICAL) When PERIODICAL for CONDITION of MAIL (RECIPIENT) is checked, set the date and time to send the mail. RECIPIENT E-MAIL ADDRESSES - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 50
can be used for the community name, user name and password. ■ SERVICE & SUPPORT (URL INFORMATION) You can display a specific URL in the URL INFORMATION field on the INFORMATION screen when an error occurs in the monitor. (See page 46.) SNMP SETTING Set whether to enable or disable SNMP. VERSION - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 51
operation will result. Power LED flashes red. "STATUS [xxxx]" appears in the corner of the screen. • Hardware has a problem. Turn off the monitor and request repair from your SHARP dealer. (When STATUS ALERT is set to OSD & LED. This varies depending on the setting.) The touch panel power LED - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 52
" is displayed on the screen and the Power LED flashes red and green alternately. (When TEMPERATURE ALERT is set to OSD & LED. This varies depending on the setting.) • If the internal temperature rises further, the monitor automatically enters standby mode. (The Power LED continues flashing - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 53
nProduct Specifications Model PN-L702B LCD component 70" Class [69-1/2 inch (176.6cm) diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors Approx. 1.06 billion colors Pixel pitch 0.802 mm (H) × 0.802 mm (V) Viewing angle 160° right/left/up/down (contrast ratio ≥ 10) Screen - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 54
DMPM: Digital Monitor Power Management DMPM Monitor ON Active OFF Screen Display No display Power consumption 235 W*1 1.0 W*1*2 *1 When PN-ZB01 (optional) is not connected. *2 When AUTO INPUT CHANGE is set to OFF. nDDC (plug and play) The monitor supports the VESA DDC (Display Data Channel - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 55
Specifications nCompatible signal timing (PC) Screen 64.13MHz 70.4MHz 74.25MHz panel size then displayed. *2 Available when the PN-ZB01 (optional) is attached. * All are compliant only with non-interlaced. * Depending on the connected PC, images may not be displayed properly even if the compatible - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 56
Specifications nPC/AV DVI-D input terminal pins (DVI-D 24 pin) nPC/AV HDMI input terminal pins (HDMITM Connector) No. Function 1 TMDS data 2- 2 TMDS data 2+ 3 TMDS data 2/4 - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 57
(For SHARP dealers and service engineers) • When installing, removing or moving the monitor, ensure that this is carried out by at least 4 people. • Be sure to use a wall-mount bracket designed or designated for mounting the monitor. • This monitor is designed to be installed on a concrete wall or - Sharp PN-L702B | PN-L702B Professional LCD Monitor Operation Manual - Page 58
PN-L702B Mu EN11H(1)
PN-L702B
LCD MONITOR
OPERATION MANUAL