Sharp PN-L702B PN-L702B Professional LCD Monitor Operation Manual - Page 24

Menu Items Menu item details The menu will differ depending on the input mode. nSCREEN You can move the menu screen display position each time DISPLAY is pressed. AUTO (PC D-SUB/PC RGB) The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted. Pressing performs adjustment. Use this automatic adjustment when you use the PC D-sub input terminal or PC RGB input terminals to display a PC screen for the first time or when you change the setting of the PC. (See page 30.) CLOCK (PC D-SUB/PC RGB) Adjusts frequency for sampling clock for applicable video. Adjust when there is flickering in the form of vertical stripes. When using the adjustment pattern (see page 30), make adjustments so that no vertical stripe noise appears in it. PHASE (PC D-SUB/PC RGB) Adjusts sampling clock phase for applicable video. Useful when small characters appear with low contrast and/ or there are flickers at corners. When using the adjustment pattern (see page 30), make adjustments so that no horizontal stripe noise appears in it. * Adjustments to PHASE should be made only after CLOCK has been correctly set. H-POS Adjust the horizontal position of the image. V-POS Adjust the vertical position of the image. H-SIZE Adjust the horizontal size of the image. V-SIZE Adjust the vertical size of the image. H-RESOLUTION (PC D-SUB/PC RGB) Sets proper horizontal resolution when the resolution of input signals is not recognized properly. (Adjustment may be impossible with some signals.) V-RESOLUTION (PC D-SUB/PC RGB) Sets proper vertical resolution when the resolution of input signals is not recognized properly. (Adjustment may be impossible with some signals.) RESET Resets the values of the SCREEN menu items to the factory preset values. Select "ON" and then press MENU . nPICTURE You can move the menu screen display position each time DISPLAY is pressed. AUTO (PC D-SUB/PC RGB) The ANALOG GAIN and ANALOG OFFSET are automatically adjusted. Pressing performs adjustment. ANALOG GAIN (PC D-SUB/PC RGB) Adjusts the bright portions of the video input signal. ANALOG OFFSET (PC D-SUB/PC RGB) Adjusts the dark portions of the video input signal. BRIGHT Adjusts the backlight brightness. (In PIP mode, the main side setting is reflected in the image.) CONTRAST Adjusts the difference between the bright and dark portions of the image. BLACK LEVEL Adjusts the entire brightness of the video signals. TINT Adjusts the hue. Selecting + changes the color towards green, and selecting - changes it towards magenta. COLORS Adjusts the color intensity. SHARPNESS Adjusts the sharpness of the image. RGB INPUT RANGE (PC DVI-D/PC HDMI/PC D-SUB/PC RGB/AV DVI-D/AV HDMI) Sets the RGB input signal range. When using HDMI set to AUTO, the RGB input signal is detected automatically. Use AUTO normally. If the RGB input signal range cannot be set appropriately even when using AUTO, set according to the image. When the setting is different, images will be displayed with washed out blacks and compressed gradients. ADVANCED (AV input) You can adjust more specifically. (See page 30.) COLOR MODE Changes the color mode on the screen. The color mode on the screen can also be changed using a remote control unit. (See page 21.) * sRGB is PC input only. See page 21 for details. (In PIP mode, the main side setting is reflected in the image.) WHITE BALANCE THRU Displays the input signal level as is. (for PC DVI-D/PC HDMI only) PRESET Selects the color temperature using PRESET. USER Used for adjusting R-/G-/B-CONTRAST and R-/G-/B-OFFSET respectively. (In PIP mode, the main side setting is reflected in the image.) PRESET Selects the color temperature when the WHITE BALANCE is set to PRESET. The setting values are shown for reference. The color temperature of the screen varies over time. This function is not intended to keep the color temperature constant. E 24