Sharp PN-L702B PN-L702B Professional LCD Monitor Operation Manual - Page 23

Menu Items Displaying the menu screen Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 24 to 27 for details of each menu items. Caution • Do not turn the main power switch off while the menu items are being displayed. Doing so may initialize the settings. nExample of operation (Adjusting CONTRAST in the PICTURE menu) MENU 1. Press to display the menu screen. SCREEN PICTURE AUDIO SETUP OPTION PIP/PbyP SCREEN AUTO CLOCK PHASE H-POS V-POS H-SIZE V-SIZE H-RESOLUTION V-RESOLUTION RESET 1/1 600 25 610 37 50 50 1920 1080 1920x1080 V: 60 Hz H: 67.5 kHz PC D-SUB END···[MENU] TIPS • The menu will differ depending on the input mode. • The menu screen will close automatically if no operation is performed for about 15 seconds. (DATE/TIME SETTING, SCHEDULE and LAN SETUP screens will close in about 4 minutes.) ▲ ▲ nMenu screen display 1 3 SCREEN PICTURE AUDIO SETUP OPTION PIP/PbyP PICTURE 1/2 AUTO ANALOG GAIN 64 ANALOG OFFSET 86 BRIGHT 31 CONTRAST 30 BLACK LEVEL 30 TINT 30 COLORS 30 SHARPNESS 12 RGB INPUT RANGE 2 PC D-SUB FULL MOVE OSD···[DISPLAY] 1920x1080 V: 60 Hz H: 67.5 kHz OK···[MENU] 4 1 Name of the menu 2 Input mode 3 An item being selected (highlighted) 4 Screen resolution of input signal, and other data. ▲ ▲ 2. Press or to select PICTURE, and press . 3. Press or to select CONTRAST. SCREEN PICTURE AUDIO SETUP OPTION PIP/PbyP PICTURE 1/2 AUTO ANALOG GAIN 64 ANALOG OFFSET 86 BRIGHT 31 CONTRAST 30 BLACK LEVEL 30 TINT 30 COLORS 30 SHARPNESS 12 RGB INPUT RANGE PC D-SUB FULL MOVE OSD···[DISPLAY] 1920x1080 V: 60 Hz H: 67.5 kHz OK···[MENU] 4. Press or to adjust the setting. ▲ ▲ SCREEN PICTURE AUDIO SETUP OPTION PIP/PbyP PICTURE 1/2 AUTO ANALOG GAIN 64 ANALOG OFFSET 86 BRIGHT 31 CONTRAST 40 BLACK LEVEL 30 TINT 30 COLORS 30 SHARPNESS 12 RGB INPUT RANGE PC D-SUB FULL MOVE OSD···[DISPLAY] 1920x1080 V: 60 Hz H: 67.5 kHz OK···[MENU] For items that have press . MENU , press , make settings and then 5. Press MENU twice to close the menu screen. TIPS • Items that cannot be selected appear in gray. (e.g. Function not supported by the current input signal) nMenu Items The displayed menu items vary depending on whether or not the PN-ZB01 (optional) is attached. The following menus will be displayed only when the PN-ZB01 (optional) is attached. Menu Item SETUP HOT PLUG CONTROL DVI RS-232C/LAN SELECT LAN SETUP SPEAKER SELECT OPTION INPUT SELECT DVI BNC AUDIO SELECT PC DVI-D PC D-SUB PC RGB AV DVI-D AV COMPONENT (BNC) AV COMPONENT (D-SUB) AV S-VIDEO AV VIDEO (BNC) AV VIDEO (D-SUB) PIP/PbyP PIP SOURCE 23 E