Sharp PN-L702B PN-L702B Professional LCD Monitor Operation Manual - Page 9

Contents IMPORTANT INFORMATION 3 DEAR SHARP CUSTOMER 5 SAFETY PRECAUTIONS 5 TIPS AND SAFETY INSTRUCTIONS 7 MOUNTING PRECAUTIONS 8 Supplied Components 9 System Requirements 9 Part Names 10 Connecting Peripheral Equipment 12 Connection with a PC or AV equipment 12 Connection when the PN-ZB01 (optional) is attached 13 Connecting the Power Cord 14 Binding Cables 14 Removing the Handles 14 Preparing the Remote Control Unit 15 Installing the batteries 15 Remote control operation range 15 Turning Power On/Off 16 Turning on the main power 16 Turning power on/off 16 Disabling power on/off operations 17 Touch Pen Preparations/Touch Action 18 Inserting the battery 18 Touch action and touch mode 18 Touch action 18 Other functions 20 Cautionary points 20 Eraser 20 Basic Operation 21 Menu Items 23 Displaying the menu screen 23 Menu item details 24 Adjustments for PC screen display 30 Initialization (Reset)/Functional Restriction Setting (FUNCTION 31 Controlling the Monitor with a PC (RS-232C 32 PC connection 32 Communication conditions 32 Communication procedure 32 Setting of the GAMMA user data 35 RS-232C command table 36 Controlling the Monitor with a PC (LAN 43 Settings to connect to a LAN 43 Controlling with a PC 45 Troubleshooting 51 Specifications 53 Mounting Precautions (For SHARP dealers and service engineers 57 For information on the touch panel driver, see the Touch Panel Driver Operation Manual. For information on the Pen Software, see the Pen Software Operation Manual. Supplied Components If any component should be missing, please contact your dealer.  Liquid Crystal Display Monitor: 1  Remote control unit: 1  Cable clamp: 2  Power cord: 1  R-6 battery ("AA" size): 2  CD-ROM (Utility Disk for Windows): 1  Setup Manual: 1  Touch pen: 1  Pen tip (for touch pen): 2  Touch pen battery (LR-03 ("AAA" size)): 1  USB cable: 1  Eraser: 1  Tray: 1  Tray mounting fitting (cover / bracket): x 2  Tray mounting screws: M5 x 4 / M4 x 2  T erminal label: 1 Used when installing the interface expansion board PN-ZB01 (optional).  C over Sharp logo: 1 Place this sticker onto the SHARP logo to cover the logo. * Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission. * For environmental protection! Do not dispose of batteries in household waste. Follow the disposal instructions for your area. System Requirements To use the touch panel, the touch panel must be connected to a computer, and the touch panel driver and Pen Software must be installed on the computer from the supplied CD-ROM. System requirements for each software program are as follows. Computer PC/AT compatible computer with a USB 1.1 port (must be able to supply a 500 mA (5.0 V) current) and able to output a resolution of 1920 x 1080. (CD-ROM drive required for software installation.) OS Windows XP (32-bit or 64-bit version), Windows Vista (32-bit or 64-bit version), Windows 7 (32-bit or 64-bit version) CPU Memory Free space on hard drive Intel Celeron or AMD Sempron 1.6 GHz or faster Intel Core 2 Duo or AMD Athlon II X2 2.8 GHz or faster recommended At least 2 GB (at least 1 GB for Windows XP) At least 100 MB (free space separately required for data storage) To connect the touch panel and install the touch panel driver, see the Touch Panel Driver Operation Manual. To install the Pen Software, see the Pen Software Operation Manual. 9E