Sharp UP-700 Instruction Manual - Page 169
On-line Configuration Programming
![]() |
View all Sharp UP-700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
On-line Configuration Programming Use the following procedure to select the on-line configuration programming. Please consult your dealer for more details. Procedure 1. In the SETTING window, select "18 ONLINE CONFIG". • The ONLINE CONFIG window will appear. 2. Program each item as follows: • TERMINAL No. (Use the numeric entry) w Terminal number (0 to 999999). • CI SIGNAL (Use the selective entry) Sensing of the CI signal NON SENSING • LINE FORM (Use the selective entry) Programming of the modem control FULL: Full duplex system HALF: Half duplex system • BAUD RATE (Use the selective entry) Transmission data rate 38400 bps 19200 bps 9600 bps 4800 bps 2400 bps 1200 bps 600 bps 300 bps • START CODE (Use the numeric entry) Start code (0 to 127) • END CODE (Use the numeric entry) End code (0 to 127) • TIME OUT (Use the numeric entry) Programming of the time-out time (1 to 255 sec.) 167
![](/manual_guide/products/sharp-up700-instruction-manual-06b26cf/169.png)