Sharp UP-700 Instruction Manual - Page 188

13 EURO Migration Function Basically your POS terminal can be automatically modified to correspond to the introduction of EURO by executing the operation "EURO STATUS" in X2/Z2 mode. However, there are several options you must set depending on your need. So, please carefully conduct necessary settings. For details, contact your authorized SHARP dealer. EURO status: You can select status from following 4 types ((A), (B), (C), or (D)). And the selectable type is decided as follows for each status. Type (A) is the base status (initial status). From type (A) From type (B) From type (C) selectable selectable selectable Items General Z1 report General Z2 report GT1/GT2/GT3 memory Exchange1 amount printing for total and change Exchange1 amount printing for total validation print Exchange1 calculation method Domestic currency symbol Domestic TAB Conversion of preset prices of Dept./PLU/EAN* Exchange1 currency descriptor Exchanger1 TAB vvv Type (B), (C), or (D) Type (C), (D) Type (D) Type (B) ISSUE ISSUE - YES YES DIVISION - - - [EURO] 2 Type (C) ISSUE ISSUE CLEAR YES YES MULTI [EURO] 2 YES The current domestic currency symbol The current domestic TAB Type (D) ISSUE ISSUE CLEAR NO NO MULTI [EURO] 2 YES - - The marked items "-" is remaining the current data. , *: The preset rate of the key is applied as the conversion rate, and the calculation method is set to "division". When the conversion has been made, the message "PRICE CONVERTED" is printed on the report. 186