Sharp UP-700 Instruction Manual - Page 187

s Add-on code UPC-A and EAN-13 may be followed by a two digits number or a five digits number as add-on code, excepting UPC-A without a check digit plus two or five digits add-on code. Therefore, the total number of digits enterable for sales entries are as shown below: Code entry UPC-A UPC-A w/leading zero UPC-A w/o check digit UPC-E EAN-8 EAN-13 No add-on code 12 13 11 6 8 13 2-digit add-on code 14 15 - - - 15 5-digit add-on code 17 18 - - - 18 NOTE Your register automatically judges the add-on code in an EAN code entered from the total number of digits and the flag. s EAN file Your POS terminal has an EAN main file and can provide a Dynamic EAN (D-EAN) file. EAN main file In general use, all EAN items are managed in the EAN main file. The programming data and sales information is recorded in the EAN main file. Dynamic EAN file If an dynamic EAN file is allocated, the items entered by EAN learning function (refer to "EAN learning function" section.) are saved in this file temporarily. (If not generated, they are directly saved in the EAN main file.) The data saved temporarily can be transferred to the EAN main file when necessary by executing D-EAN LOAD in the PGM2 mode. If you want to use the dynamic EAN file, consult your authorized SHARP dealer. 185