Sharp VE-CG40U VECG40U Operation Manual - Page 16

Operation References Operation References Turning the On-screen Display and Backlight On/Off Use the DISPLAY button to turn on/off the onscreen displays, or to turn off the LCD screen backlight. Each time you press this button, the screen changes as shown below. Remaining Battery Power Display This camera can display the remaining battery power indicator during operation. If the battery power becomes very low, replace the batteries with new ones (see page 7). In or = mode ISO 0010 [2 4 4 8] F i n e LCD screen backlight on, On-screen displays on 0.0 E V 1/ 5 0 0 F5.6 LCD screen backlight on, On-screen displays off 0.0 E V 1/ 5 0 0 F5.6 (Green) (Red) Remaining battery power indicator Warning indicator LCD screen backlight off Note: • The examples shown are the screens for [ mode. In w mode [2 4 4 8] F ine 0. 0EV 1 / 500 F 5.6 Notes: • When the battery runs down completely, the status indicator blinks red and the power shuts down. • Use the remaining battery power indicator only as an approximate value. • The indicator may change to a higher or lower level if the power is turned off and then on again. • In cold environments, the red indicator may appear sooner. • Use of the zoom functions when the warning indicator is displayed may cause the camera to suddenly lose power. • When the battery power becomes very low, some menu items may not be selectable or some functions may not work properly. 00 100-0010 00 100-0010 Note: • You cannot turn the LCD screen backlight off in 6 w mode.