Sharp VE-CG40U VECG40U Operation Manual - Page 55
Manual Exposure, Control Mode
![]() |
View all Sharp VE-CG40U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Manual Exposure Control Mode Use when your photographic objectives are not met by AE settings and you want complete control over exposure. Try various exposures and see the difference in effect. Also, review the captured image on the LCD screen before you try another exposure. 4 Press the Shutter button half- way down to focus on the subject. 5 Press the Shutter button fully to capture the image. Selectable shutter speeds F2.0 to F6.7: 16s to 1/500s F8 : 16s to 1/1000s 1 Set the Mode Dial to ",", then power on camera. 2 Set any desired menu items. Note: • The available mode is described below the function title in each page. You can set the functions indicated with "," in that description. 3 Press j or k to select the desired shutter speed setting (1), and press l or m to select the desired F-stop (2). Manual Exposure Control mode icon Advanced Features 1/ 5 0 0 F5.6 Shutter speed F-stop • If the photograph would be under- or over- exposed, the shutter speed and aperture values in the status bar will display red. In such case, select other combinations to obtain an appropriate setting, which will display the values in white. • If you set a slow shutter speed the image taken could come out blurred. The shutter speed and aperture values will display yellow to alert you to this possibility. 45
![](/manual_guide/products/sharp-vecg40u-vecg40u-operation-manual-e210c6a/55.png)