Sharp VE-CG40U VECG40U Operation Manual - Page 30
Video
View all Sharp VE-CG40U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Basic Operations Previewing Previewing on a TV screen Available in w mode You can connect the camera to a TV to enjoy preview with several people. Preparation 1 Make sure each device to be connected is powered off. 2 Open the jack cover on the camera (see page 2). 3 Connect the camera to your TV (or VCR) with the supplied A/V cable, as shown below. Previewing 1 Set the Mode Dial to "w", then power on the camera. 2 Press the MENU button until the menu screen appears. 3 Press l or m to select "~", then press the SET button. 4 Press l or m to select "VIDEO OUT", then press the SET button. SE T T I NG 2 PC CONNECT L A NGUA G E V I DEO OU T U ND ON T LS ACS T I MA G E S P E APKA ELR BEEP R E T URN VIDEO (MONO)L-AUDIO-R S-VIDEO AV-IN A/V cable (supplied) 5 Press l or m to select the TV system in your location, then press the SET button. V I DEO OU T NTSC PAL 6 Press the MENU button to turn off the menu screen. 7 Begin preview (see page 17 or 18). Note: • Close the jack cover after use. Basic Operations : The arrow shows the signal flow. 4 Turn on the TV and set it to the "AV" or "VIDEO" channel. (See the operation manual of your TV.) • When connecting to a TV via a VCR, turn on the VCR and set it to the "AV" or "LINE" input channel. Operate the TV as you normally do to view the signal from the VCR. (See the operation manuals of your TV and VCR.) 20