Sharp VE-CG40U VECG40U Operation Manual - Page 23
Basic Operations
![]() |
View all Sharp VE-CG40U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Basic Operations Basic Operations Capturing Capturing a Still Image in Auto Mode In Auto Mode, the camera automatically sets the best aperture, shutter speed, exposure value and white balance. Light metering is set to Center mode. • Before you start, perform the procedures described on pages 7 to 12 to prepare your camera for capturing images. Status indicator Mode dial Shutter button 5 Press the Shutter button half- way down to focus on the subject. • The camera automatically focuses on the subject. While focusing, you will see the status indicator blinks green and v blinks white in the display. When the camera locks into focus, they stop blinking and light up. ISO 0010 [2 4 4 8] F ine 1/ 5 0 0 F5.6 Power button 1 Insert a card into the camera (see page 9). 2 Remove the lens cap. 3 Set the Mode Dial to "[". 4 Press the Power button until the camera turns on. 6 Press the Shutter button fully to capture the image. • The status indicator blinks while data is being recorded on the card, and stops blinking when recording completes. • When the QUICK VIEW menu item is set to "ON", the captured image displays on the LCD screen for a few seconds. 1/ 5 0 0 F5.6 • To capture another image, release the Shutter button and make sure the status indicator lights up, then perform steps 5 and 6. Notes: • Do not turn the power off while the status indicator is blinking in step 6. • Remove the lens cap before powering on the camera. 13
![](/manual_guide/products/sharp-vecg40u-vecg40u-operation-manual-e210c6a/23.png)