Sharp VE-CG40U VECG40U Operation Manual - Page 19
Inserting and Removing, a Card
View all Sharp VE-CG40U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Preparation Inserting and Removing a Card You can use an SD Memory Card for storing images. Inserting 1 Make sure that the power is off. 2 Open the card slot cover in the direction of arrow. Removing Perform steps 1 and 2 in "Inserting", then push the card and release your finger slowly (1). Then pull the card straight out (2) as shown below. Notes: • The supplied card is preformatted for immediate use. • See page 60 for more information on the cards intended for use with this camera. • Do not remove the card from the camera while recording data on the card (S indicator blinks during recording). This may delete the recorded image or damage the card. About the write protect switch 3 Make sure the SD Memory Card's write- SD Memory Cards have a write protect switch. protect switch is in the unlocked position. When the switch is set to the locked position, Then insert the card into the slot as you cannot record/delete data or format the shown below, and push it fully. card. Set it to the unlocked position to record/ delete data or format the card. Write protect switch Back view Unlocked position Locked position Clipped corner 4 Close the card slot cover. 9