Sharp XL-DV60 XL-DV60 Operation Manual - Page 18
Connecting the AC power cord, Demonstration mode, To turn the power
UPC - 074000366084
View all Sharp XL-DV60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Preparation for Use XL-DV60 System connections (continued) " Connecting the AC power cord After checking all the connections have been made correctly, connect the AC power cord to the AC power input jack, then plug the AC power cord of this unit into the AC outlet. If you plug in the unit first, the unit will enter the demonstration mode. AC outlet (AC 120 V, 60 Hz) Notes: ! Never use a power cord other than the one supplied. Otherwise, a malfunction or an accident may occur. ! Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged period of time. Cooling fan: A cooling fan is built into this unit for better heat radiation. Do not cover the opening in this section with any obstacles to avoid damage to the unit. " Demonstration mode When you plug the unit in for the first time, the unit will enter the demonstration mode. You will see words scroll. To cancel the demonstration mode: When the unit is in the power standby mode (demonstration mode), press the X-BASS/DEMO button. The unit will enter the low power consumption mode. To return to the demonstration mode: When the unit is in the power stand-by mode, press the X-BASS/ DEMO button again. Note: When the power is on, the X-BASS/DEMO button can be used to select the extra bass mode. " To turn the power on Press the ON/STAND-BY button to turn the power on. After use: Press the ON/STAND-BY button to enter the power stand-by mode. 18