Sharp XL-DV60 XL-DV60 Operation Manual - Page 24

DVD Operation XL-DV60 Playing a disc (continued) Caution: ! Do not place two discs in one disc tray. ! Do not play discs with special shapes (heart or octagon shaped) as it may cause malfunctions. ! Do not push the disc compartment while it is moving. ! If the power fails while the disc compartment is open, wait until the power is restored. ! If the disc compartment is stopped with force, the unit will not func- tion. If this occurs, press the ON/STAND-BY button to enter the power stand-by mode and then turn the power on again. ! If a disc is damaged, dirty, or loaded upside down, the disc will skip or not play. ! When attempting to play discs with scratches or of a different region number, or unplayable or restricted (*1) discs, an error message will appear on the TV display and the disc will not play. (*1) Viewing is prohibited on some DVDs according to the audi- ence age. Notes: ! When the unit is turned on, no operation is possible for 10 sec- onds as the unit is performing the initial setting. ! Stop positions may be recorded on some discs. When you play such a disc, playback stops there. ! During an operation, " " may appear indicating that the opera- tion is disabled by the disc. " To resume playback after stopping (resume play) You can resume playback from the point playback is stopped. 1 While the disc is playing, press the button. Pre-Stop The system stores the point you stopped. 2 To restart play, press the (play) button. Play Playback resumes from the point you left off. To cancel resume play: Press the button again while " Pre-Stop" is lit. Stop Notes: ! The resume play feature is disabled on some discs. ! Depending on the disc, playback may resume slightly before the position where it was stopped. 24