Sony CDP-CE515 Operating Instructions - Page 13

Playing CDs You can extend the playing time during scanning the discs Press DISC CHECK repeatedly until the playing time you want (10, 20 or 30) appears in the display. Each time you press the button, the playing time changes cyclically. Notes • When you press the DISC CHECK button, the play mode automatically changes to ALL DISCS Continuous Play mode. • When you've opened the disc tray by pressing the EX-CHANGE button, you cannot use the DISC CHECK function. • Even if you press the DISC CHECK button while "REPEAT" appears in the display (see page 14), the player stops after scanning all the discs once. Locating a Specific Track You can quickly locate any track while playing a disc using the AMS (AMS: Automatic Music Sensor) control or number buttons on the remote. ≠ AMS ± To locate You need to The next or succeeding tracks Turn ≠ AMS ± clockwise until you find the track. When using the remote, press + repeatedly until you find the track. The current or preceding tracks Turn ≠ AMS ± counterclockwise until you find the track. When using the remote, press =repeatedly until you find the track. A specific track directly Z Press the number button of the track on the remote A track by scanning each track for 10 seconds Z (Music Scan) Press MUSIC SCAN on the remote before you start playing. When you find the track you want, press · to start playing. When you directly locate a track numbered over 10 Z Press >10 first, then the corresponding number buttons on the remote. To enter "0," use button 10. Example: To play track number 30 Press >10 first, then 3 and 10. You can extend the playing time during Music Scan Press MUSIC SCAN repeatedly until the playing time you want (10, 20 or 30) appears in the display. Each time you press the button, the playing time changes cyclically. MUSIC SCAN >10 =/+ Number buttons · 13EN