Sony DCR-TRV22 Operating Instructions (primary manual) - Page 198

Usable cassettes Audio mode 12-bit mode: The original sound can be recorded in stereo 1, and the new sound in stereo 2 in 32 kHz. The balance between stereo 1 and stereo 2 can be adjusted by selecting AUDIO MIX in the menu settings during playback. Both sounds can be played back. 16-bit mode: A new sound cannot be recorded but the original sound can be recorded in high quality. Moreover, it can also play back sound recorded in 32 kHz, 44.1 kHz or 48 kHz. When playing back the tape recorded in the 16-bit mode, the 16BIT indicator appears on the screen. When you play back a dual sound track tape When you play back a dual sound track tape recorded in a stereo system, set HiFi SOUND in to a desired mode in the menu settings (p. 178). Sound from speaker HiFi Sound Mode Playing back the stereo tape STEREO 1 2 Stereo L channel R channel Playing back the dual sound track tape Main sound and sub sound Main sound Sub sound You cannot record dual sound programs on your camcorder. Notes on the cassette To prevent accidental erasure Slide the write-protect tab on the cassette to expose the red mark. When affixing a label on the cassette Be sure to affix a label only on the locations as illustrated below [a] so as not to cause malfunction of your camcorder. Do not affix a label around this border. 198 [a] After using the cassette Rewind the tape to the beginning, put the cassette in its case, and store it in an upright position.