Home » Sony Manuals » Video Cameras » Sony DCR-TRV22 » Manual Viewer

Sony DCR-TRV22 Operating Instructions (primary manual) - Page 207

Charging the built-in rechargeable battery, Adjusting the LCD screen CALIBRATION

Add to My Manuals
Save this manual to your list of manuals

Page 207 highlights

Maintenance information and precautions (2) Remove dust from inside the eyecup and viewfinder with a commercially available blower. (3) In the reverse way of (1), attach the eyecup. Caution Do not remove any other screws. You may remove only the screw to remove the eyecup. Notes •Do not drop or bend the eyecup shaft. •Be careful when handling the eyecup. Charging the built-in rechargeable battery Your camcorder has a built-in rechargeable battery so that the date, time and other settings are retained even when the POWER switch is set to OFF (CHG). The built-in rechargeable battery is always charged as long as you are using your camcorder. The battery, however, will get discharged gradually if you do not use your camcorder. It will be completely discharged in about 4 months if you do not use your camcorder at all. Even if the built-in rechargeable battery is not charged, it will not affect your camcorder operation. To retain the date and time, etc., charge the battery if the battery is discharged. Charging the built-in rechargeable battery •Connect your camcorder to the house current using the AC Adaptor supplied with your camcorder, and leave your camcorder with the POWER switch set to OFF (CHG) for more than 24 hours. •Or install the fully charged rechargeable battery pack on your camcorder, and leave your camcorder with the POWER switch set to OFF (CHG) for more than 24 hours. Adjusting the LCD screen (CALIBRATION) The buttons on the touch panel may not work correctly. If this happens, follow the procedure below. (1) Set the POWER switch to OFF (CHG). (2) Eject the tape from your camcorder, then disconnect any connecting cable from your camcorder. (3) Set the POWER switch to VCR while pressing DSPL/BATT INFO on your camcorder, then keep pressing DSPL/BATT INFO for about 5 seconds. (4) Touch displayed on the screen using an object such as the corner of a "Memory Stick." The position of changes. CALIBRATE Additional Information Notes •If you do not press the right spot, start from step 4 again. •You cannot calibrate the LCD screen when the LCD screen is facing out. 207

Section	Page
Main Features	4
Quick Start Guide	8
Recording on “Memory Stick” (DCR-TRV22/TRV33 only)	10
Using this manual	12
Checking supplied accessories	15
Step 1 Preparing the power source	16
Installing the battery pack	16
Charging the battery pack	17
Checking status of battery pack – Battery Info	20
Connecting to a wall outlet	21
Step 2 Setting the date and time	22
Step 3 Using the touch panel	23
Recording a picture	25
Shooting backlit subjects – Back light function	33
Shooting in the dark – NightShot/Super NightShot/Color Slow Shutter	34
Checking recordings – End search/Edit search/Rec Review	37
Playing back tape	39
To display the screen indicators – Display function	40
Viewing a recording on TV	44
Recording still images on “Memory Stick” during tape recording standby or tape recording (DCR-TRV22/TRV33 only)	46
Recording a still image on a tape – Tape Photo recording (DCR-TRV19 only)	48
Self-timer recording	50
Adjusting the white balance manually	52
Using the wide mode	53
Using the fader function	55
Using special effects – Picture effect	58
Using special effects – Digital effect (DCR-TRV22/TRV33 only)	59
Using PROGRAM AE	62
Adjusting the exposure manually	64
Using spot light-metering function – Flexible Spot Meter	65
Focusing manually	66
Using spot focus function – Spot Focus	67
Interval Recording	68
Frame by frame recording – Frame recording	69
Using the viewfinder	70
Playing back tape with picture effect	72
Playing back tape with digital effect (DCR-TRV22/TRV33 only)	73
Enlarging images recorded on tape – Tape PB ZOOM (DCR-TRV22/TRV33 only)	74
Quickly locating a scene – Zero set memory	75
Searching the boundaries of recorded tape by title – Title search	76
Searching a recording by date – Date search	77
Searching for a photo – Photo search/Photo scan (DCR-TRV19 only)	79
Dubbing tape	81
Dubbing only desired scenes – Digital program editing (on tape)	84
Recording video or TV programs	93
Inserting a scene from a VCR – Insert editing	95
Audio dubbing	97
Superimposing a title on a cassette with Cassette Memory	101
Making your own titles	103
Labeling a cassette on a cassette with Cassette Memory	104
Erasing all the data in Cassette Memory	105
Using “Memory Stick”	106
Inserting/Ejecting the “Memory Stick”	109
Selecting image quality and size	110
Recording still images on “Memory Stick” – Memory Photo recording	114
Recording an image from tape as a still image	118
Superimposing a still image in “Memory Stick” on an image – MEMORY MIX	120
Interval Photo Recording	124
Recording moving pictures on “Memory Stick” – MPEG MOVIE recording	125
Self-timer recording	127
Recording a picture from tape as a moving picture	128
Recording edited pictures from tape as a moving picture – Digital program editing (on “Memory Stick”)	130
Changing the recording folder	133
Viewing a still image – Memory Photo playback	135
Viewing a moving picture – MPEG MOVIE playback	137
Choosing a playback folder	139
Enlarging still images recorded on “Memory Stick” – Memory PB ZOOM	140
Playing back images continuously – Slide show	141
Preventing accidental erasure – Image protection	142
Deleting images – DELETE	143
Changing image size – Resize (DCR-TRV33 only)	146
Writing a print mark – Print mark	147
Viewing images with a computer – Introduction	148
Connecting your camcorder to a computer using the USB cable (For Windows users)	151
Viewing pictures recorded on tape on a computer – USB Streaming (For Windows users)	161
Viewing images recorded on “Memory Stick” on a computer (For Windows users) (DCR-TRV22/TRV33 only)	167
Connecting your camcorder to a computer using the USB cable (For Macintosh users) (DCR-TRV22/TRV33 only)	170
Viewing images recorded on “Memory Stick” on a computer (For Macintosh users) (DCR-TRV22/TRV33 only)	172
Capturing images from an analog video unit on a computer – Signal convert function (DCR-TRV22/TRV33 only)	173
Changing the menu settings	175
Troubleshooting	186
Types of trouble and how to correct trouble	186
Self-diagnosis display	194
Warning indicators	195
Warning messages	196
Additional Information	197
Usable cassettes	197
About the “InfoLITHIUM” battery pack	200
About i.LINK	202
Using your camcorder abroad	204
Maintenance information and precautions	205
Specifications	211
Identifying parts and controls	213

Match case Limit results 1 per page

207

Additional Information

Maintenance information and precautions

CALIBRATE

(

)

Remove dust from inside the eyecup and viewfinder with a commercially

available blower.

(

)

In the reverse way of

(

)

, attach the eyecup.

Caution

Do not remove any other screws. You may remove only the screw to remove the eyecup.

Notes

•Do not drop or bend the eyecup shaft.

•Be careful when handling the eyecup.

Charging the built-in rechargeable battery

Your camcorder has a built-in rechargeable battery so that the date, time and other

settings are retained even when the POWER switch is set to OFF (CHG). The built-in

rechargeable battery is always charged as long as you are using your camcorder. The

battery, however, will get discharged gradually if you do not use your camcorder. It

will be completely discharged in

about 4 months

if you do not use your camcorder at

all. Even if the built-in rechargeable battery is not charged, it will not affect your

camcorder operation. To retain the date and time, etc., charge the battery if the battery

is discharged.

Charging the built-in rechargeable battery

•Connect your camcorder to the house current using the AC Adaptor supplied with

your camcorder, and leave your camcorder with the POWER switch set to OFF (CHG)

for more than 24 hours.

•Or install the fully charged rechargeable battery pack on your camcorder, and leave

your camcorder with the POWER switch set to OFF (CHG) for more than 24 hours.

Adjusting the LCD screen (CALIBRATION)

The buttons on the touch panel may not work correctly. If this happens, follow the

procedure below.

(

)

Set the POWER switch to OFF (CHG).

(

)

Eject the tape from your camcorder, then disconnect any connecting cable from

your camcorder.

(

)

Set the POWER switch to VCR while pressing DSPL/BATT INFO on your

camcorder, then keep pressing DSPL/BATT INFO for about 5 seconds.

(

)

Touch

displayed on the screen using an object such as the corner of a

"Memory Stick.”

The position of

changes.

Notes

•If you do not press the right spot, start from step 4 again.

•You cannot calibrate the LCD screen when the LCD screen is facing out.