Sony DCR-TRV22 Operating Instructions (primary manual) - Page 41
Using the Remote Commander, Press DATA CODE on the Remote Commander during playback.
View all Sony DCR-TRV22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Playback - Basics Playing back tape Using the Remote Commander Press DATA CODE on the Remote Commander during playback. The display changes as follows: date/time t various settings (SteadyShot off, exposure, white balance, gain, shutter speed, aperture value) t (no indicator) t date/time t... To prevent the various data from being displayed Select DATE in DATA CODE in in the menu setting (p. 184). Each time you press DATA CODE on the Remote Commander, the display changes as follows: data/time y (no indicator) Note If you press DATA CODE on the Remote Commander when the POWER switch is set to OFF (CHG), no indicator appears. Various settings Various settings shows your camcorder's recording information at the time of recording. During tape recording standby, the various settings will not be displayed. When you use data code, bars (-- -- --) appear if: - A blank portion of the tape is being played back. - The tape is unreadable due to tape damage or noise. - The tape was recorded by a camcorder without the date and time set. Data code When you connect your camcorder to a TV, the data code also appears on the TV screen. 41