Sony DCRTRV900 Operating Instructions - Page 89
Dubbing with the AUDIO/VIDEO jack, Dubbing with the built-in microphones
UPC - 027242547025
View all Sony DCRTRV900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Advanced operations Audio dubbing Dubbing with the AUDIO/VIDEO jack Audio equipment AUDIO/ VIDEO Ç : Signal flow LINE OUT L R AUDIO L AUDIO R A/V connecting cable Do not connect the video (yellow) plug. Note The picture is not output from the AUDIO/VIDEO jack. Check the recorded picture on the LCD screen or in the viewfinder, as well as check the recorded sound by using a speaker or headphones. Dubbing with the built-in microphones No connection is necessary. Adding an audio sound on a recorded tape (1) Insert your recorded tape into the camcorder. (2) Set the POWER switch to VTR. (3) On the camcorder, locate the point where the recording should begin by pressing 0 or ). Then press P to set it to playback pause mode. (4) Press AUDIO DUB on the Remote Commander . (5) Press P on the Remote Commander and at the same time start playing back the audio you want to record. (6) Press p on the Remote Commander at the point where you want to stop recording. 89