Sony DPF D72N Operating Instructions - Page 20
Turning the photo frame on, Turning on the power, Operations in an initial state - not turning on
UPC - 027242778108
View all Sony DPF D72N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Turning the photo frame on When you have already turned on your photo frame in the previous section, skip to the next section. Turning on the power Press 1 (on/standby) on the photo frame or remote control to turn on the power. The standby indicator turns to green from red. The Sony logo on the front panel lights up (DPFA72N/D72N only). Operations in an initial state When the photo frame is turned on without a memory card connected, the initial display below appears on the screen. If the photo frame is not operated for 10 seconds, the demo mode is displayed. If any other button than the power button is pressed, the screen returns to the initial display. First, press MENU during the initial display, and then set the date and time. Turning off the power Hold 1 (on/standby) on the photo frame or remote control until the power turns off. The standby indicator turns to red from green. Note Do not turn the photo frame off or disconnect the AC adaptor from the photo frame before the standby indicator turns red. Doing so may damage the photo frame. 20 GB