Sony DSCP51 Operating Instructions - Page 19
Using an external power source, Using your camera abroad - dc charger
UPC - 027242606500
View all Sony DSCP51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Getting started Using an external power source DC IN jack cover DC plug 1 AC power adaptor (not supplied) , Open the DC IN jack cover, then connect the AC-LS1 AC power adaptor (not supplied) to the DC IN jack of the camera. Connect the cable with the v mark facing up. • Connect the AC power adaptor to an easily accessible wall outlet (mains) close by. If something goes wrong while you are using the adaptor, immediately shut off the power by pulling the plug out of the wall outlet. 2 To the wall outlet (mains) Power cord (mains lead) 1 2 , Connect the power cord (mains lead) to the AC power adaptor and to the wall outlet (mains). • When you have finished using the AC power adaptor, disconnect it from the DC IN jack of the camera. • To use power from an automobile, use a DC adaptor/Charger (not supplied). • If you insert or remove the DC plug while you are using the batteries, the power may shut off. Using your camera abroad Power sources You can use your camera in any country or area with the supplied battery charger or the AC-LS1 AC power adaptor (not supplied) within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b]. BC-CS1 • Do not use an electronic transformer. Using this may cause a malfunction. 19