Sony HCD-ZUX9 Service Manual - Page 29

HCD-ZUX9 [CD ERROR CODE MODE] • Display the CD error code when an error occurred Procedure: 1. Press @/1 button to turn on the system. 2. Press x button, [ENTER] button and [DISC 1] button simultaneously to enter the error code display mode. 3. The fluorescent indicator tube displays the number of total error. 4. Each time m/- button or M/ + button is pressed, display change as below. && : Emerging error 01 : Stop while chucking up. 02 : Stop while chucking down. 03 : Time-out of EX-CHANGE open. 05 : Time-out of EX-CHANGE close. ## : Not used • Display of no disc errors DISPLAY D*$$%%&&##00 DISPLAY OF TOTAL ERROR M/ + BUTTON m/- BUTTON >/TUNING + BUTTON DISPLAY OF MECHANICAL ERRORS ./TUNING - BUTTON M/ + BUTTON m/- BUTTON >/TUNING + BUTTON DISPLAY OF NO DISC ERRORS ./TUNING - BUTTON 5. To clear the error record, operate the cold reset. (Refer to the "COLD RESET") 6. To release from this mode, press the @/1 button or disconnect the power plug to turn off the system. • Display of total error DISPLAY Em**Ed** Em** : The number of mechanical errors. Ed** : The number of no disc errors after chucking the disc. • Display of mechanical errors DISPLAY M*$$%%&&##00 M* : The number of mechanical error ("0" is latest one) (Press > button to display the next error) $$ : Not used %% : Loading related error (Second figure is not used) D : Stop by the problem other than mechanical problem while closing. E : Stop by the problem other than mechanical problem while opening. C : Stop by the problem other than mechanical problem while chucking up. F : Stop by the problem other than mechanical problem while chucking down. D* : The number of no disc error ("0" is latest one) (Press > button to display next error) $$ : Error type 01 : Focus error 02 : GFS error 03 : Setup error %% : Not used &&: 00 : No disc judgment without chucking retry. 01 : No disc judgment after chucking retry. ## : The state when judged as no disc 01 : Stop 02 : Setup 03 : TOC reading 04 : Access 05 : Playback 06 : Pause 07 : Manual search (Play) 08 : Manual search (Pause) • To release from this mode, press @/1 button. [CD REPEAT 5 LIMIT OFF MODE] • The number of repeat for CD playback is 5 times when the repeat mode is "REPEAT ALL". This mode enables CD to repeat playback for limitless times. Procedure: 1. Press @/1 button to turn on the system. 2. Select CD function. 3. Press x button, [CD] button and [DISC 1] button simultaneously to enter the CD repeat 5 limit off mode and the fluorescent indicator tube displays "LIMIT OFF". • To release from this mode, operate the cold reset. (Refer to the "COLD RESET"). [CD SHIP MODE (WITH MEMORY CLEAR)] • This mode moves the optical pick-up to the position durable to vibration and clears all data including preset data stored in the RAM to initial conditions during the next AC-In. Use this mode when returning the set to the customer after repair. Procedure: 1. Press @/1 button to turn on the system. 2. Select CD function. 3. Press x button, [DISC 1] button and @/1 button simultaneously. The system turns off automatically. 4. After the "STANDBY" blinking display finishes, a message "MECHA LOCK" is displayed on the fluorescent indicator tube and the CD ship mode is set. 29