Sony HDCU-4300 Operation Guide - Page 26

Notes • Items that are turned off using the page settings of the VIDEO/MONITOR menu are not displayed. • A "-" mark is displayed for each item when a camera is not connected. System status *System Status* 01/05 CHU Mode :HDC4300 Reference:1080/59.94I Locked Slot1 :1080/59.94P(3x)/3G-B Slot2-1 2-2 2-3 2-4 Slot3-1 3-2 :1080/59.94P/3G-A :1080/59.94P/3G-B :1080/59.94P/Link-A :1080/59.94P/Link-B 1080/59.94I 525/59.94I CHU Mode: CHU MODE (connected camera) setting Reference: Reference signal format used and genlock status ("Not detected" is displayed when a reference signal is not input.) Slot1: Output signal format of SLOT1 Slot2: Output signal format of each connector of SLOT2 Slot3: Output signal format of each connector of SLOT3 Camera system diagnostics *System Diagnosis* Optical Condition CAM ssxxxxxxg OK CCU ssxxxxxxg Warning 02/05 Camera Cable :Connected Power Supply :OK Cable Length : 100m Network Link Status :Up CCU No. :10 Optical Condition CAM: Camera light sensor level Optical Condition CCU: Unit light sensor level Camera Cable: Camera cable connection status Power Supply: Camera power supply status Cable Length: Cable length Network Link Status: LAN connection status CCU No.: CCU number setting status Camera and unit audio status *Audio* Camera MIC Gain CH1 :60dB CH2 :60dB CCU Audio Out :AES/EBU 03/05 Camera MIC Gain CH1: Camera microphone circuit 1 amp gain status Camera MIC Gain CH2: Camera microphone circuit 2 amp gain status CCU Audio Out: Output format of the AUDIO OUT connector of the unit Camera and unit intercom status *Intercom* Camera Engineer Producer CCU MIC/PGM Line :MIC On :MIC Off :MIC Off :System 04/05 Camera Engineer: Camera microphone status of the ENG line of the camera Camera Producer: Camera microphone status of the PROD line of the camera CCU MIC/PGM: Status of MIC/PGM switch on the front of the unit CCU Line: Intercom system connection status 26