Sony HDCU-4300 Operation Guide - Page 55
Network Menu, Cam Power, Force Legacy, Laser Diode On, Disable, Normal, Hfr Link, Name, No.
View all Sony HDCU-4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
MAINTENANCE Page name Page No. M09 M10 M11 Item Set value Description ASSIGNABLE SWITCH READ INSTALLED OPTIONS LASER DIODE ON BACKUP RETURN VF NONE, BARS, CAM POWER, FORCE LEGACY, LASER DIODE ON Execute with ENTER. Sets the function to be assigned to the assignable button on the front panel. NONE: No assignment. BARS: Sets the color bar output to ON/OFF. CAM POWER: Sets camera power to ON/OFF. FORCE LEGACY: Forces the communication mode to LEGACY mode. LASER DIODE ON: Turns the optical signal output from the CCU to the camera ON/OFF. Reads the installation key from the USB flash drive. List of installed options. (Display only) ENABLE, DISABLE NORMAL, HFR LINK Sets whether to save the state of the LASER DIODE setting on the page of the SYSTEM OPERATION menu for the next startup. Sets the VF return signal to the camera. NORMAL: Normal-speed signal HFR LINK: HFR signal 1LINK (steady image can be used as the image to display in the viewfinder) NETWORK menu NETWORK Page name Page No. N01 N02 N03 Item Set value Description IP ADDRESS 0.0.0.0 to 255.255.255.255 SUBNET MASK 0.0.0.0 to 255.255.255.255 DEFAULT GATEWAY 0.0.0.0 to 255.255.255.255 MAC ADDRESS (xx:xx:xx:xx:xx:xx) CNS MODE LEGACY, BRIDGE, MCS MCS MODE CLIENT CCU NO MASTER IP ADDRESS TSL UMD PORT When MCS is selected in CNS MODE: Blank, 1 to 96 When LEGACY or BRIDGE is selected in CNS MODE: Blank, 1 to 96, A to Z 0.0.0.0 to 255.255.255.255 DISABLE, ENABLE LAN-COM PORT NUMBER PACKET STATUS 8900 NOT RECEIVED, RECEIVED Sets the IP address. Sets the subnet mask. Sets the default gateway. Displays the MAC address of the unit. Sets the communication mode. Indicates that the unit is the client when MCS mode is selected. (Display only) Sets the CCU number. Sets the master device IP address for MCS mode. Enables/disables IP Tally using TSL UMD V5.0. Displays the LAN port being used (Fixed to LANCOM). UDP port number for TSL UMD connection Displays the TSL UMD packet reception status. When received, it also displays IDs and the on/off status of the red, green, and yellow tallies. Up to five IDs can be displayed. "AND MORE" is displayed if there are more. 55