Sony HDCU-4300 Operation Guide - Page 58
When HKCU-IP43F is installed, LAN1&LAN2
View all Sony HDCU-4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
NETWORK Page name Page No. N05 (When HKCU-IP43F is installed) N07 (When HKCU-4001 is installed) Item Set value Description IP LIVE SYSTEM MANAGER PORT The settings vary depending on the installed option. When HKCU-IP43F is installed: LAN1, LAN1&LAN2 When HKCU-4001 is installed: DISABLE, LAN1&LAN2 Sets IP Live System Manager (LSM). DISABLE: Does not communicate with LSM. LAN1: Communicates with LSM using LAN1 only. LAN1&LAN2: Communicates with LSM using LAN1 and LAN2 (redundancy). Note Restart the unit after changing the PORT setting. DHCP The settings vary depending on the installed option. When HKCU-IP43F is installed: OFF, ON When HKCU-4001 is installed: OFF (fixed) When HKCU-IP43F is installed Sets whether to set the LSM IP address using DHCP or to set it manually. ON: Sets the LSM IP address using DHCP. OFF: Sets the LSM IP address manually. Set to OFF (fixed) when DHCP is set to OFF on the NETWORKED MEDIA INTERFACE page. When HKCU-4001 is installed OFF (fixed) PRIMARY IP ADDRESS 0.0.0.0 to 255.255.255.255 Sets the IP address of LSM1. SECONDARY IP 0.0.0.0 to 255.255.255.255 ADDRESS Sets the IP address of LSM2. PRIMARY CONNECTION STATUS DISCONNECTED, CONNECTING, CONNECTED Displays the status of the connection with LSM1. DISCONNECTED: Disconnected. CONNECTING: Establishing communication. CONNECTED: Communication established. SECONDARY CONNECTION STATUS DISCONNECTED, CONNECTING, CONNECTED Displays the status of the connection with LSM2. DISCONNECTED: Disconnected. CONNECTING: Establishing communication. CONNECTED: Communication established. MULTICAST ADDRESS (When HKCU-4001 is installed) AUTO, MANUAL Switches the mode of the multicast address setting of the IP stream. AUTO: When PORT is set to LAN1&LAN2, this option is fixed to AUTO, and multicast addresses specified by the LSM are used. MANUAL: When PORT is set to DISABLE, this option is fixed to MANUAL, and the multicast addresses are set manually on the MULTICAST ADDRESS 1 to 5 pages. HITLESS FAILOVER ON, OFF Sets whether to use IP stream redundancy. (When HKCU-4001 is installed) ON: Use redundancy. OFF: Do not use redundancy. ST 2110 4K ENABLE, DISABLE Enables/disables ST2110 4K stream input/output. When the LAN1 or LAN2 link speed is 10G, this is set to DISABLE (fixed). SAP ANNOUNCE ON, OFF SAP notifications on/off setting 58