Sony HDCU-4300 Operation Guide - Page 65

SDI OUTPUT • 3G/HD SDI OUTPUT (SLOT1) BNC-type (8) 3G-SDI: SMPTE ST424/425 Level-A/B, 0.8 Vp-p, 75 ohms, 2.970 Gbps/ 2.967 Gbps HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 ohms, 1.485 Gbps/1.4835 Gbps 3G-SDI/HD-SDI switchable • 3G/HD/SD SDI OUTPUT (SLOT2) BNC-type (4) 3G-SDI: SMPTE ST424/425 Level-A/B, 0.8 Vp-p, 75 ohms, 2.970 Gbps/ 2.967 Gbps HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 ohms, 1.485 Gbps/1.4835 Gbps SD-SDI: SMPTE ST259, 0.8 Vp-p, 75 ohms, 270 Mbps 3G-SDI/HD-SDI/SD-SDI, character signal selectable Supplied accessories Number plates (1 set) Operation guide (1) Operation manual (CD-ROM) (1) Optional accessories United States and Canada: Power cord set (1-551-812-XX) Other areas: Power cord set (1-782-929-XX) United States and Canada: Plug holder B (2-990-242-01) Other areas: Plug holder C (3-613-640-01) CCA-5-3 Connection Cable (3 meters), CCA-5-10 Connection Cable (10 meters) Maintenance Manual Related devices HDC4300 Color Camera HDC-P43 Multi Purpose Camera RCP-3000/1000 series or later Remote Control Panel MSU-1000 series Master Setup Unit HZC-CSM10 Camera System Management Software SZC-4002/4002M/4002W HFR Software SZC-2001/2001M/2001W HD CUTOUT Software HKCU-IP43F Networked Media Interface Board HKCU-4002 12G-SDI Extension Kit HKCU-4001 ST 2110 Interface Kit HKCU-IP43F General Power consumption 18.2 W Operating temperature 5 °C to 40 °C (41 °F to 104 °F) Storage temperature -20 °C to +60 °C (-4 °F to +140 °F) Dimensions (w/h/d, excluding protrusions) Mass NET board: Approx. 94 × 10 × 227 mm (3 3/4 × 13/32 × 9 inches) CN board: Approx. 55 × 22 × 136 mm (2 1/4 × 7/8 × 5 3/8 inches) NET board: Approx. 0.18 kg (6.3 oz) CN board: Approx. 0.14 kg (4.9 oz) Output connectors CN board: NMI-LAN SFP+ (2) 10G BASE-** (using SFP+ transceiver module) Supplied accessories 30-pin cable (1) Harnesses (4) Screws (M3 × 8) (5) Installation Guide (1) Related devices OTM-10GSR1 SFP+ transceiver module HKCU-4001 General Power consumption 42 W Operating temperature 5 °C to 40 °C (41 °F to 104 °F) Storage temperature -20 °C to +60 °C (-4 °F to +140 °F) Dimensions (w/h/d, 206 × 58 × 387 mm excluding protrusions) (8 1/8 × 2 3/8 × 15 1/4 inches) Mass Approx. 0.7 kg (1 lb 8.7 oz) I/O connectors Connectors SFP+, SFP28 Number of lines 2 Signal type 10GBASE-**, 25GBase-** (depending on SFP+/SFP28 transceiver module) For information about the supported SFP+ and SFP28 transceiver modules (e.g. OTM-10GSR1), contact your Sony sales or service representative. Supplied accessories Flat cable 30-pin (1) Coaxial cable 30-pin (1) Coaxial cable 40-pin (1) Power supply harness (1) Screws M3×8 (6) Screws M2.6×5 (2) Wire saddle (4) Protective tape (1) Label (1) Operating Instructions (1) Related devices OTM-10GSR1 SFP+ Transceiver Module OTM-25GSR1 SFP28 Transceiver Module 65